POSE SELECTION FOR THE KINEMATIC CALIBRATION OF A PROTOTYPED 4 DEGREES OF FREEDOM MANIPULATOR

被引：10

作者：

Horne, Andrew ^{[1
]}

Notash, Leila ^{[1
]}

机构：

[1] Queens Univ, Dept Mech & Mat Engn, Kingston, ON, Canada

来源：

TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING | 2009年 / 33卷 / 04期

关键词：

pose selection; kinematic calibration; DESIGN;

D O I：

10.1139/tcsme-2009-0043

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper explores the pose selection for the kinematic calibration of the constraining linkage of a 4 degrees of freedom parallel manipulator. The aim is to select a set of poses out of a larger pool of possible poses which improve the calibration accuracy. Five different criteria have been suggested in the literature and are investigated in this article. The results show that the pose selection criteria did not significantly improve the calibration of this parallel manipulator. There was very little difference between applying the criteria and not applying it and some of the results using the criteria were worse than not using any criteria.

引用

页码：619 / 632

页数：14

共 50 条

[21] Kinematic Calibration of a Multisection Bionic Manipulator
Escande, Coralie
Chettibi, Taha
Merzouki, Rochdi
Coelen, Vincent
Pathak, Pushparaj Mani
IEEE-ASME TRANSACTIONS ON MECHATRONICS, 2015, 20 (02) : 663 - 674
[22] A Calibration Method for a Three-degrees-of-freedom Parallel Manipulator with a Redundant Passive Chain
Oiwa, Takaaki
Daido, Harunaho
Asama, Junichi
MECHANISMS, MECHANICAL TRANSMISSIONS AND ROBOTICS, 2012, 162 : 171 - +
[23] Mechanism design and kinematic analysis of a robotic manipulator driven by joints with two degrees of freedom (DOF)
Huang, He
Dong, Erbao
Xu, Min
Yang, Jie
Low, Kin Huat
INDUSTRIAL ROBOT-THE INTERNATIONAL JOURNAL OF ROBOTICS RESEARCH AND APPLICATION, 2018, 45 (01): : 34 - 43
[24] On the position kinematic analysis of MaPaMan: a reconfigurable three-degrees-of-freedom spatial parallel manipulator
Srivatsan, R. Arun
Bandyopadhyay, Sandipan
MECHANISM AND MACHINE THEORY, 2013, 62 : 150 - 165
[25] Kinematic calibration of a lightweight manipulator for medical applications
Department of Cybernetics and Robotics, Faculty of Electronics Photonics and Microsystems, Wroclaw University of Science and Technology, Wybrzeze Wyspiańskiego 27, Wroclaw
50-370, Poland
不详
20-618, Poland
不详
50-370, Poland
不详
20-143, Poland
Bull. Pol. Acad. Sci. Tech. Sci., 2024, 6
[26] Anthropomorphic manipulator system of three degrees of freedom
Aguirre Gil, Inaki
Andueza, Luis
Arismendi, Cesar
REVISTA ITECKNE, 2011, 8 (01): : 87 - 95
[27] TELEMETRIC SYSTEM OF SIX DEGREES OF FREEDOM MANIPULATOR
Pilis, A.
Recko, M.
Dzierzek, K.
ENGINEERING MECHANICS 2018 PROCEEDINGS, VOL 24, 2018, : 685 - 688
[28] A Four Degrees of Freedom Parallel Manipulator for Machining
Chen, Wenjia
He, Yanzhong
Zhang, Jiang
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 2168 - 2171
[29] The Shape Jacobian of a manipulator with hyper degrees of freedom
Mochiyama, H
Kobayashi, H
ICRA '99: IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND AUTOMATION, VOLS 1-4, PROCEEDINGS, 1999, : 2837 - 2842
[30] Calibration of visual measurement system for excavator manipulator pose
Liu, Guangxu
Wang, Qingfeng
Li, Bingcheng
Xi, Xiangshuo
MEASUREMENT SCIENCE AND TECHNOLOGY, 2024, 35 (07)

← 1 2 3 4 5 →