Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel (62 HRC)

被引：58
|
作者：
Aslan, E [1 ]
机构：
[1] Kirrikale Univ, Dept Mech Engn, TR-7140 Kirikkale, Turkey
来源：
MATERIALS & DESIGN | 2005年 / 26卷 / 01期
关键词：
tool performance; tool wear; hardened tool steel;
D O I：
10.1016/j.matdes.2004.04.004
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This study explored the performance and wear behaviour of different cutting tools in end milling of X210 Cr12 cold-work tool steel hardened to 62 HRC. The purpose of the experiments reported in this paper is to investigate the wear of TiCN coated tungsten carbide, TiCN + TiAlN coated tungsten carbide, TiAlN coated cermet, mixed ceramic with Al2O3 + TiCN and cubic boron nitride (CBN) tools. Tool performance evaluation was based on the surface finish and tool flank wear. Tool flank wear was studied carefully through JSM 5600 (30 kW) scanning electron microscope. Surface roughness values were measured by Mitutoyo Metusurf 310 equipment. CBN tool exhibited the best cutting performance in terms of both flank wear and surface finish. The highest volume of metal removal was obtained with CBN tool. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码：21 / 27
页数：7
相关论文
共 50 条
  • [1] Experimental Study on the Effect of Cold Air Cutting on Cutting Temperature, Cutting Force and Tool Wear during Machinging of Cr12 Tool Steel
    Ren, J. L.
    Su, Y.
    Guan, X. Y.
    Li, Y. W.
    Wang, Q. X.
    [J]. MACHINING AND ADVANCED MANUFACTURING TECHNOLOGY X, 2010, 431-432 : 334 - 337
  • [2] HIGH SPEED END MILLING OF HARDENED AISI D3 COLD WORK TOOL STEEL WITH CBN CUTTING TOOL
    Aslan, E.
    Camuscu, N.
    [J]. GAZI UNIVERSITY JOURNAL OF SCIENCE, 2005, 18 (03): : 453 - 458
  • [3] Cutting Forces in High Speed Milling of Hardened Steel by Coated Tool
    Wu, L. D.
    Wang, C. Y.
    Yu, D. H.
    Song, Y. X.
    [J]. ULTRA-PRECISION MACHINING TECHNOLOGIES, 2009, 69-70 : 418 - 422
  • [4] Research on cutting performances of tool rounded cutting edge in high speed milling hardened steel
    Yang, S. C.
    Zheng, M. L.
    Fan, Y. H.
    Xu, W.
    [J]. HIGH SPEED MACHINING, 2011, 188 : 139 - 144
  • [5] Trail investigation on chip of high-speed and dry cutting on hardened steel with PCBN tool
    Qing Z.
    Zuo D.
    Xie F.
    Zhang C.
    [J]. Advanced Materials Research, 2011, 142 : 26 - 30
  • [6] THE EFFECT OF THE CUTTING SPEED ON THE CUTTING FORCES AND SURFACE FINISH WHEN MILLING CHROMIUM 210 Cr12 STEEL HARDFACINGS WITH UNCOATED CUTTING TOOLS
    Altin, Abdullah
    [J]. MATERIALI IN TEHNOLOGIJE, 2014, 48 (03): : 373 - 378
  • [7] Experimental investigation into effect of cutting parameters on surface integrity of hardened tool steel
    Bashir, K.
    Alkali, A. U.
    Elmunafi, M. H. S.
    Yusof, N. M.
    [J]. 3RD INTERNATIONAL CONFERENCE ON SCIENCE, TECHNOLOGY, AND INTERDISCIPLINARY RESEARCH (IC-STAR), 2018, 344
  • [8] Cutting Forces Analysis During High Speed Milling of Hardened Tool Steel
    Abdulgadir, Mustafa M.
    [J]. MODERN METHODS OF CONSTRUCTION DESIGN, 2014, : 549 - 555
  • [9] Optimizing cutting parameters in minimum quantity of lubrication milling of hardened cold work tool steel
    Iqbal, A.
    Dar, N. U.
    He, N.
    Khan, I.
    Li, L.
    [J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2009, 223 (01) : 43 - 54
  • [10] An experimental evaluation of cutting temperatures during high speed machining of hardened D2 tool steel
    Kishawy, HA
    [J]. MACHINING SCIENCE AND TECHNOLOGY, 2002, 6 (01) : 67 - 79
12345