Experimental investigation of cutting tool performance in high speed cutting of hardened X210 Cr12 cold-work tool steel (62 HRC)

被引：58

作者：

Aslan, E ^{[1
]}

机构：

[1] Kirrikale Univ, Dept Mech Engn, TR-7140 Kirikkale, Turkey

来源：

MATERIALS & DESIGN | 2005年 / 26卷 / 01期

关键词：

tool performance; tool wear; hardened tool steel;

D O I：

10.1016/j.matdes.2004.04.004

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This study explored the performance and wear behaviour of different cutting tools in end milling of X210 Cr12 cold-work tool steel hardened to 62 HRC. The purpose of the experiments reported in this paper is to investigate the wear of TiCN coated tungsten carbide, TiCN + TiAlN coated tungsten carbide, TiAlN coated cermet, mixed ceramic with Al2O3 + TiCN and cubic boron nitride (CBN) tools. Tool performance evaluation was based on the surface finish and tool flank wear. Tool flank wear was studied carefully through JSM 5600 (30 kW) scanning electron microscope. Surface roughness values were measured by Mitutoyo Metusurf 310 equipment. CBN tool exhibited the best cutting performance in terms of both flank wear and surface finish. The highest volume of metal removal was obtained with CBN tool. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：21 / 27

页数：7

共 50 条

[31] Effect of work material hardness and cutting parameters on performance of coated carbide tool when turning hardened steel: An optimization approach
Chinchanikar, Satish
Choudhury, S. K.
MEASUREMENT, 2013, 46 (04) : 1572 - 1584
[32] The effects of cutting conditions on mixed ceramic and cubic boron nitride tool wear and on surface roughness during machining of X200Cr12 steel (60 HRC)
Yallese, MA
Rigal, JF
Chaoui, K
Boulanouar, L
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2005, 219 (01) : 35 - 55
[33] Tool life and cutting speed for the maximum productivity at the drilling of the stainless steel X22CrMoV12-1
Vlase, A.
Blajina, O.
Iacob, M.
Darie, V.
MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING (MODTECH2015), 2015, 95
[34] Machining performance of protruded textured high-speed steel cutting tool under dry turning operation
Prasad, K. Nagendra
Ismail, Syed
MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 2115 - 2123
[35] Experimental Investigation on Cutting Tool Performance of Newly Synthesized P/M Alloy Steel Under Turning Operation
T. Panneerselvam
T. K. Kandavel
P. Kishore
Arabian Journal for Science and Engineering, 2019, 44 : 5801 - 5809
[36] Experimental Investigation on Cutting Tool Performance of Newly Synthesized P/M Alloy Steel Under Turning Operation
Panneerselvam, T.
Kandavel, T. K.
Kishore, P.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2019, 44 (06) : 5801 - 5809
[37] Experimental investigations of processing the high carbon cold-work tool steel 1.2358 by laser metal deposition for the additive manufacturing of cold forging tools
Hentschel, O.
Scheitler, C.
Fedorov, A.
Junker, D.
Gorunov, A.
Haimerl, A.
Merklein, M.
Schmidt, M.
JOURNAL OF LASER APPLICATIONS, 2017, 29 (02)
[38] MOSSBAUER MEASUREMENTS BACKSCATTERING TECHNIQUE (CXMS) OF LASER IRRADIATED COLD FORMING TOOL STEEL (X210CR12)
SCHAAF, P
BAUER, P
GONSER, U
HYPERFINE INTERACTIONS, 1989, 46 (1-4): : 541 - 548
[39] Experimental investigation of cryogenic cooling on cutting force, surface roughness and tool wear in end milling of hardened AISI D3 steel using uncoated tool
Ravi, S.
Gurusamy, P.
MATERIALS TODAY-PROCEEDINGS, 2020, 33 : 3314 - 3318
[40] Experimental study on the cutting performance of microwave sintered Al2O3/TiC ceramic tool in the machining of hardened steel
Cheng, Yu
Hu, Hanpeng
Sun, Shishuai
Yin, Zengbin
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 55 : 39 - 46

← 1 2 3 4 5 →