Cutting Forces in High Speed Milling of Hardened Steel by Coated Tool

被引：1

作者：

Wu, L. D. ^{[1
]}

Wang, C. Y. ^{[1
]}

Yu, D. H. ^{[1
]}

Song, Y. X. ^{[1
]}

机构：

[1] Guangdong Univ Technol, Inst Mfg Technol, Guangzhou 510006, Guangdong, Peoples R China

来源：

ULTRA-PRECISION MACHINING TECHNOLOGIES | 2009年 / 69-70卷

关键词：

Coated tool; Cutting forces; High speed milling; Hardened steel;

D O I：

10.4028/www.scientific.net/AMR.69-70.418

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Hardened steel P20 at 50 HRC is milled at high speed by TiN coated and TiAlN coated solid carbide straight end mills, and the cutting forces and tool wear are measured. The result shows that TiAlN coated tool is more suitable for cutting hardened steel at high speed. Then the hardened steel is milled under different cutting parameters. It is indicated that the effect of cutting speed on cutting forces is small, but the effect of cutting speed on machine vibration should be considered. Increase feed per tooth or radial depth of cut will increase the cutting forces.

引用

页码：418 / 422

页数：5

共 50 条

[1] Cutting Forces Analysis During High Speed Milling of Hardened Tool Steel
Abdulgadir, Mustafa M.
[J]. MODERN METHODS OF CONSTRUCTION DESIGN, 2014, : 549 - 555
[2] Cutting forces, surface roughness and tool life in high-speed milling of hardened steel convex surface
Isabela da Costa Castanhera
Anselmo Eduardo Diniz
[J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, 39 : 3555 - 3570
[3] Cutting forces, surface roughness and tool life in high-speed milling of hardened steel convex surface
Castanhera, Isabela da Costa
Diniz, Anselmo Eduardo
[J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (09) : 3555 - 3570
[4] Research on cutting performances of tool rounded cutting edge in high speed milling hardened steel
Yang, S. C.
Zheng, M. L.
Fan, Y. H.
Xu, W.
[J]. HIGH SPEED MACHINING, 2011, 188 : 139 - 144
[5] Cutting thickness of high speed ball-end milling hardened steel
Yang, S.C.
Jiang, B.
Li, H.Y.
Zheng, M.L.
Wang, S.J.
[J]. Advanced Materials Research, 2012, 426 : 24 - 27
[6] Effects of cutting parameters on chip morphology and tool wear in high-speed face milling of hardened steel
Cui, Xiaobin
Zhao, Jun
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (06) : 921 - 931
[7] The effects of cutting parameters on tool life and wear mechanisms of CBN tool in high-speed face milling of hardened steel
Cui, Xiaobin
Zhao, Jun
Dong, Yongwang
[J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2013, 66 (5-8): : 955 - 964
[8] The effects of cutting parameters on tool life and wear mechanisms of CBN tool in high-speed face milling of hardened steel
Xiaobin Cui
Jun Zhao
Yongwang Dong
[J]. The International Journal of Advanced Manufacturing Technology, 2013, 66 : 955 - 964
[9] HIGH SPEED END MILLING OF HARDENED AISI D3 COLD WORK TOOL STEEL WITH CBN CUTTING TOOL
Aslan, E.
Camuscu, N.
[J]. GAZI UNIVERSITY JOURNAL OF SCIENCE, 2005, 18 (03): : 453 - 458
[10] Cutting Force and Tool Wear in Face Milling of Hardened Steel
Cui, Xiaobin
Zhao, Jun
[J]. HIGH SPEED MACHINING V, 2012, 723 : 77 - 81

← 1 2 3 4 5 →