Optimization of friction coefficient of kenaf/epoxy composites as an alternative friction material using Taguchi method

被引：0
|
作者：
Mustafa, A. [1 ]
Abdollah, M. F. B. [1 ,2 ]
Amiruddin, H. [1 ,2 ]
Shuhimi, F. F. [1 ]
Tahir, N. A. M. [1 ]
Muhammad, N. [1 ,2 ]
Kamal, S. E. Mat [1 ,2 ]
Ismail, N. [1 ,2 ,3 ]
机构：
[1] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Teknikal Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Twente, Fac Engn Technol, Dept Surface Technol & Tribol, POB 217, NL-7500 AE Enschede, Netherlands
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016 | 2016年
关键词：
Kenaf; polymer composite; friction coefficient;
D O I：
暂无
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper introduces the application of Taguchi optimization methodology in optimizing the design factors for obtaining high friction coefficient of kenaf/epoxy composites under dry sliding condition. An orthogonal array of the Taguchi method was set-up and used to analyse the effect of the design parameters on the friction coefficient. Tribological testing was conducted using a pin-on-disc tribometer. For the highest friction coefficient, 45wt.% non-treated kenaf fiber sliding at 19.62N, 500rpm and 100 degrees C is found to be the optimized combination of levels of all the six control factors. The confirmation test proves that the optimized friction coefficient is within the range of friction coefficient of conventional friction material.
引用
收藏
页码：11 / 12
页数：2
相关论文
共 50 条
  • [31] Aptness of kenaf powder as a friction modifier in the fabrication of brake friction material by powder metallurgy route
    Talib, R. J.
    Selamat, M. A.
    Nordin, N. A.
    Jumahat, A.
    Sharudin, H.
    Zaharudin, A. M.
    JURNAL TRIBOLOGI, 2018, 19 : 121 - 131
  • [32] Calculating shear friction using an effective coefficient of friction
    Tanner, John A.
    PCI JOURNAL, 2008, 53 (03): : 114 - 120
  • [33] Composition optimization of friction material using ANN and GA
    Lin Youxi
    Gao Chenghui
    Zhu Tiehong
    3RD CHINA-JAPAN CONFERENCE ON MECHATRONICS 2006 FUZHOU, 2006, : 314 - 318
  • [34] Optimization of microstructural and mechanical properties of friction stir welded A356 pipes using Taguchi method
    Akbari, Mostafa
    Asadi, Parviz
    MATERIALS RESEARCH EXPRESS, 2019, 6 (06)
  • [35] FRICTION STIR WELDING OF AL-MG ALLOY OPTIMIZATION OF PROCESS PARAMETERS USING TAGUCHI METHOD
    Vijayan, S.
    Raju, R.
    Subbaiah, K.
    Sridhar, N.
    Rao, S. R. K.
    EXPERIMENTAL TECHNIQUES, 2010, 34 (05) : 37 - 44
  • [36] Parametric study and optimization of multiwalled carbon nanotube filled friction composite materials using taguchi method
    Singh, Tej
    Chauhan, Ranchan
    Patnaik, Amar
    Gangil, Brijesh
    Nain, Ramesh
    Kumar, Anil
    POLYMER COMPOSITES, 2018, 39 : E1109 - E1117
  • [37] Optimization of microstructural and mechanical properties of brass wire produced by friction stir extrusion using Taguchi method
    Akbari, Mostafa
    Asadi, Parviz
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2021, 235 (12) : 2709 - 2719
  • [38] Optimization of injection molding parameters for Kenaf/PP composite using Taguchi method
    Radzi, Mohd Khairul Fadzly Md
    Sulong, Abu Bakar
    Muhamad, Norhamidi
    Razak, Zakaria
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON ADVANCED PROCESSES AND SYSTEMS IN MANUFACTURING (APSIM 2016), 2016, : 121 - 122
  • [39] A study of friction vibration absorber: impact of friction modeling on the efficacy of the absorber and friction coefficient optimization
    Nasr, Aymen
    Mrad, Charfeddine
    Nasri, Rachid
    MECHANICS & INDUSTRY, 2019, 19 (06)
  • [40] The Friction Welding Method with Translational Friction by Intermediate Material
    Tsujino, Ryoji
    Hashimoto, Masaharu
    Matsuura, Kiyoshi
    Roko, Kiyokazu
    NEW FRONTIERS IN LIGHT METALS, 2010, : 99 - 109
12345