Optimization of friction coefficient of kenaf/epoxy composites as an alternative friction material using Taguchi method

被引：0

作者：

Mustafa, A. ^{[1
]}

Abdollah, M. F. B. ^{[1
,2
]}

Amiruddin, H. ^{[1
,2
]}

Shuhimi, F. F. ^{[1
]}

Tahir, N. A. M. ^{[1
]}

Muhammad, N. ^{[1
,2
]}

Kamal, S. E. Mat ^{[1
,2
]}

Ismail, N. ^{[1
,2
,3
]}

机构：

[1] Univ Teknikal Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Teknikal Malaysia Melaka, Ctr Adv Res Energy, Durian Tunggal 76100, Melaka, Malaysia

[3] Univ Twente, Fac Engn Technol, Dept Surface Technol & Tribol, POB 217, NL-7500 AE Enschede, Netherlands

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2016 | 2016年

关键词：

Kenaf; polymer composite; friction coefficient;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper introduces the application of Taguchi optimization methodology in optimizing the design factors for obtaining high friction coefficient of kenaf/epoxy composites under dry sliding condition. An orthogonal array of the Taguchi method was set-up and used to analyse the effect of the design parameters on the friction coefficient. Tribological testing was conducted using a pin-on-disc tribometer. For the highest friction coefficient, 45wt.% non-treated kenaf fiber sliding at 19.62N, 500rpm and 100 degrees C is found to be the optimized combination of levels of all the six control factors. The confirmation test proves that the optimized friction coefficient is within the range of friction coefficient of conventional friction material.

引用

页码：11 / 12

页数：2

共 50 条

[1] Optimization of friction properties of kenaf polymer composite as an alternative friction material
Mustafa, Ashafie
Bin Abdollah, Mohd Fadzli
Amiruddin, Hilmi
Shuhimi, Fairuz Fazillah
Muhammad, Noryani
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2017, 69 (02) : 259 - 266
[2] Characteristics of friction material using kenaf as a friction modifier
Talib, R. J.
Selamat, M. A.
Nordin, N. A.
Jumahat, A.
Sharudin, H.
Zaharudin, A. M.
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 462 - 463
[3] Selection and verification of kenaf fibres as an alternative friction material using Weighted Decision Matrix method
Mustafa, Ashafi'e
Bin Abdollah, Mohd Fadzli
Shuhimi, Fairuz Fazillah
Ismail, Nurhidayah
Amiruddin, Hilmi
Umehara, Noritsugu
MATERIALS & DESIGN, 2015, 67 : 577 - 582
[4] Optimization of Friction Welding Using Response Surface Method and Taguchi
Akhmad, Sabarudin
Muzakki, Hakam
Mujaini, Setya
Falah, Yusqy Fajrul
INNOVATIVE SCIENCE AND TECHNOLOGY IN MECHANICAL ENGINEERING FOR INDUSTRY 4.0, 2019, 2187
[5] Investigation of various factors affecting the coefficient of friction of yarn by using Taguchi method
Muhammad, Mohsin
Li, Nai-Wen
Muhammad, Aunjam Sohail
Muhammad, Majeed Kashif
INDUSTRIA TEXTILA, 2019, 70 (03): : 211 - 215
[6] Optimization on Impact Strength of Woven Kenaf Reinforced Polyester Composites using Taguchi Method
Khalid, S. N. A.
Ismail, A. E.
Zainulabidin, M. H.
COLLOQUIUM OF ADVANCED MECHANICS (CAMS2016), 2017, 165
[7] Multi-response optimization in friction properties of PBT composites using Taguchi method and principle component analysis
Fung, CP
Kang, PC
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 170 (03) : 602 - 610
[8] Investigation of material extrusion parameters and printing material impacts on wear and friction using the Taguchi method
Aslan, Enes
RAPID PROTOTYPING JOURNAL, 2025,
[9] Predicting and analyzing of tribo-performance of NAO friction composites using Taguchi Method
Yusubov, F.
JOURNAL OF NEW TECHNOLOGY AND MATERIALS, 2023, 13 (01) : 57 - 69
[10] Optimization of wear coefficient and coefficient of friction of borosilicate glass ceramics using Taguchi coupled grey fuzzy logic technique
Das, Sangeeta
Das, Shubhajit
Gautam, S. S.
Gautam, C. R.
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1579 - 1589

← 1 2 3 4 5 →