Investigation of plastic eta factors for clamped SE(T) specimens based on three-dimensional finite element analyses

被引：30
|
作者：
Huang, Yifan [1 ]
Zhou, Wenxing [1 ]
机构：
[1] Univ Western Ontario, Dept Civil & Environm Engn, London, ON N6A 5B9, Canada
来源：
ENGINEERING FRACTURE MECHANICS | 2014年 / 132卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
J integral; Three-dimensional finite element analysis (3D FEA); Single-edge notched tension (SE(T)); eta(pl) factor; FRACTURE SPECIMENS; RESISTANCE CURVES; PART I; CONSTRAINT; TOUGHNESS; PIPELINES; GEOMETRY;
D O I：
10.1016/j.engfracmech.2014.10.028
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Three-dimensional finite element analyses of clamped single-edge tension (SE(T)) specimens are performed to evaluate the plastic eta factors (i.e. eta(pl)) for computing the J-integral. The analysis covers both plane-sided and side-grooved specimens with a wide range of specimen configurations (a/W from 0.2 to 0.7 and B/W equal to 1 and 2) and strain hardening exponents (n = 5, 8.5, 10, 15 and 20). Based on the analysis results, a set of expressions for eta(pl) are proposed. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：120 / 135
页数：16
相关论文
共 50 条
  • [31] Constraint-corrected J-R curve based on three-dimensional finite element analyses
    Huang, Y.
    Zhou, W.
    Wang, E.
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2014, 37 (10) : 1101 - 1115
  • [32] Further investigation of J-CTOD relationship for clamped SET specimens based on finite element analyses-Part I: Homogeneous materials
    Duan, Chuanjie
    Zhang, Shuhua
    THEORETICAL AND APPLIED FRACTURE MECHANICS, 2022, 121
  • [33] Three-dimensional finite element analyses on the transtibial residual limb and its prosthetic socket
    Hong Kong Polytechnic Univ, Hong Kong, Hong Kong
    Shengwu Yixue Gongchengxue Zazhi/Journal of Biomedical Engineering, 2000, 17 (04): : 403 - 406
  • [34] Development of finite element techniques for three-dimensional analyses of thermo-piezoelectric materials
    Shang, FL
    Kuna, M
    Scherzer, M
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2003, 125 (01): : 18 - 21
  • [35] Three-dimensional finite element analyses of tyre derived aggregates in ballasted and ballastless tracks
    Farooq, Mohammad Adnan
    Nimbalkar, Sanjay
    Fatahi, Behzad
    Computers and Geotechnics, 2021, 136
  • [36] Three-dimensional finite element analyses of tyre derived aggregates in ballasted and ballastless tracks
    Farooq, Mohammad Adnan
    Nimbalkar, Sanjay
    Fatahi, Behzad
    COMPUTERS AND GEOTECHNICS, 2021, 136
  • [37] Investigation of the axial stiffness of a bolt using a three-dimensional finite element model
    Zadoks, RI
    Kokatam, DPR
    JOURNAL OF SOUND AND VIBRATION, 2001, 246 (02) : 349 - 373
  • [38] A three-dimensional finite element model of the cervical spine: an investigation of whiplash injury
    Jian-Guo Zhang
    Fang Wang
    Rui Zhou
    Qiang Xue
    Medical & Biological Engineering & Computing, 2011, 49 : 193 - 201
  • [39] A three-dimensional finite element model of the cervical spine: an investigation of whiplash injury
    Zhang, Jian-Guo
    Wang, Fang
    Zhou, Rui
    Xue, Qiang
    MEDICAL & BIOLOGICAL ENGINEERING & COMPUTING, 2011, 49 (02) : 193 - 201
  • [40] Investigation of linear dependence problem of three-dimensional partition of unity-based finite element methods
    An, X. M.
    Zhao, Z. Y.
    Zhang, H. H.
    Li, L. X.
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 2012, 233 : 137 - 151
12345