Investigation of plastic eta factors for clamped SE(T) specimens based on three-dimensional finite element analyses

被引：30
|
作者：
Huang, Yifan [1 ]
Zhou, Wenxing [1 ]
机构：
[1] Univ Western Ontario, Dept Civil & Environm Engn, London, ON N6A 5B9, Canada
来源：
ENGINEERING FRACTURE MECHANICS | 2014年 / 132卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
J integral; Three-dimensional finite element analysis (3D FEA); Single-edge notched tension (SE(T)); eta(pl) factor; FRACTURE SPECIMENS; RESISTANCE CURVES; PART I; CONSTRAINT; TOUGHNESS; PIPELINES; GEOMETRY;
D O I：
10.1016/j.engfracmech.2014.10.028
中图分类号：
O3 [力学];
学科分类号：
08 ; 0801 ;
摘要：
Three-dimensional finite element analyses of clamped single-edge tension (SE(T)) specimens are performed to evaluate the plastic eta factors (i.e. eta(pl)) for computing the J-integral. The analysis covers both plane-sided and side-grooved specimens with a wide range of specimen configurations (a/W from 0.2 to 0.7 and B/W equal to 1 and 2) and strain hardening exponents (n = 5, 8.5, 10, 15 and 20). Based on the analysis results, a set of expressions for eta(pl) are proposed. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码：120 / 135
页数：16
相关论文
共 50 条
  • [21] Comparison of two- and three-dimensional finite element analyses of adhesive joints
    Richardson, G.
    Crocombe, A.D.
    Smith, P.A.
    International Journal of Adhesion and Adhesives, 1993, 13 (03): : 193 - 200
  • [22] Experimental and finite element modal analyses of planar mechanisms with three-dimensional geometries
    Smaili, A
    Bagci, I
    JOURNAL OF MECHANICAL DESIGN, 1998, 120 (03) : 401 - 403
  • [23] Investigation of ultrasonic backscatter using three-dimensional finite element simulations
    Liu, Yuan
    Van Pamel, Anton
    Nagy, Peter B.
    Cawley, Peter
    JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 2019, 145 (03): : 1584 - 1595
  • [24] Three-dimensional finite-element analyses of corner cracks at stress concentrations
    Tan, PW
    Newman, JC
    Bigelow, CA
    ENGINEERING FRACTURE MECHANICS, 1996, 55 (03) : 505 - 512
  • [25] Three-dimensional finite element analyses of repair process and safety margin assessment
    Chen, Mingya
    Yu, Weiwei
    Xue, Fei
    Fan, Mingyu
    Jia, Wenqing
    Chen, Zhilin
    Ku, Francis
    Wang, Weiqiang
    Shi, Jinhua
    INTERNATIONAL JOURNAL OF PRESSURE VESSELS AND PIPING, 2019, 172 : 283 - 294
  • [26] Experimental and finite element modal analyses of planar mechanisms with three-dimensional geometries
    Smaili, A.
    Bagci, I.
    Journal of Mechanical Design, Transactions of the ASME, 1998, 120 (03): : 401 - 403
  • [27] Application of Large Three-Dimensional Finite-Element Analyses to Practical Problems
    Lee, Fook-Hou
    Hong, Sze-Han
    Gu, Qian
    Zhao, Pengjun
    INTERNATIONAL JOURNAL OF GEOMECHANICS, 2011, 11 (06) : 529 - 539
  • [28] THREE-DIMENSIONAL FINITE ELEMENT ANALYSES OF COMPACT TENSION SPECIMENS OF IRRADIATED Zr-2.5Nb MATERIALS USING SUBMODELING
    Sung, Shin-Jang
    Pan, Jwo
    Lam, Poh-Sang
    Scarth, Douglas A.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, 2016, VOL 6A, 2017,
  • [29] Prediction of Three-Dimensional Milling Forces Based on Finite Element
    Zhu, Lida
    Zhu, Chunxia
    Pei, Jiaying
    Li, Xuebing
    Wang, Wei
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2014, 2014
  • [30] A comparative study of three-dimensional and two-dimensional finite element analyses for intersecting shells
    Skopinsky, VN
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2001, 36 (03): : 313 - 322
12345