Self-lubricating bearings from stainless steel 316L powders

被引：0

作者：

Vetayanugul, B ^{[1
]}

Coovattanachai, O ^{[1
]}

Krataitong, R ^{[1
]}

Mata, S ^{[1
]}

Lasutta, P ^{[1
]}

Kongchatree, K ^{[1
]}

Burke, P ^{[1
]}

Tongsri, R ^{[1
]}

机构：

[1] Natl Met & Mat Technol Ctr, MTEC, Klongluang 12120, Pathumthani, Thailand

来源：

PROCEEDINGS OF THE 1ST INTERNATIONAL CONFERENCE ON NEW FORMING TECHNOLOGY | 2004年

关键词：

powder metallurgy; stainless steels; self-lubricating bearings;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The 316L stainless steel has excellent mechanical properties and corrosion resistance. It is thus promising for producing high performance and high value-added parts. Powder metallurgy (P/M) is the only method for producing self-lubricating bearings/bushings. Two types of high performance self-lubricating bushes have been designed and manufactured using database on die compaction and sintering of 316L stainless steel powders. It was found that the optimum manufacturing conditions were as follows; debinding at 600 degreesC for 60 minutes, under argon atmosphere, and sintering at 1300 degreesC for 30 min. under pure hydrogen atmosphere.

引用

页码：633 / 637

页数：5

共 50 条

[21] Effect of atomization on surface oxide composition in 316L stainless steel powders for additive manufacturing
Riabov, Dmitri
Hryha, Eduard
Rashidi, Masoud
Bengtsson, Sven
Nyborg, Lars
SURFACE AND INTERFACE ANALYSIS, 2020, 52 (11) : 694 - 706
[22] Phase transformation of 316L stainless steel from wire to fiber
Shyr, Tien-Wei
Shie, Jing-Wen
Huang, Shih-Ju
Yang, Shun-Tung
Hwang, Weng-Sing
MATERIALS CHEMISTRY AND PHYSICS, 2010, 122 (01) : 273 - 277
[23] Comparative analysis of gas atomised and recycled 316L stainless steel powders for Binder Jetting
Mariani, M.
Salaheldin, K.
Grande, A.
Lecis, N.
METALLURGIA ITALIANA, 2023, (02): : 14 - 22
[24] PECVD of biocompatible coatings on 316L stainless steel
Prasad, GR
Daniels, S
Cameron, DC
McNamara, BP
Tully, E
O'Kennedy, R
SURFACE & COATINGS TECHNOLOGY, 2005, 200 (1-4): : 1031 - 1035
[25] Injection molding of 316L stainless steel microstructures
Z. Y. Liu
N. H. Loh
S. B. Tor
Y. Murakoshi
R. Maeda
K. A. Khor
T. Shimidzu
Microsystem Technologies, 2003, 9 : 507 - 510
[26] Cavitation Erosion Behavior of 316L Stainless Steel
Guiyan Gao
Zheng Zhang
Tribology Letters, 2019, 67
[27] Electropolishing of 316L stainless steel for anticorrosion passivation
Hocheng, H
Kao, PS
Chen, YF
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (04) : 414 - 418
[28] Hydrogen embrittlement of 316L type stainless steel
Herms, E
Olive, JM
Puiggali, M
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 272 (02): : 279 - 283
[29] The interaction of galling and oxidation in 316L stainless steel
Rogers, Samuel R.
Bowden, David
Unnikrishnan, Rahul
Scenini, Fabio
Preuss, Michael
Stewart, David
Dini, Daniele
Dye, David
WEAR, 2020, 450
[30] Sintering diagram for 316L stainless steel fibers
Li, Aijun
Ma, Jun
Wang, Jianzhong
Xu, Zhongguo
Li, Chaolong
Tang, Huiping
POWDER TECHNOLOGY, 2016, 288 : 109 - 116

← 1 2 3 4 5 →