Microstructure characterization and mechanical properties of Al-based coating on magnesium alloy prepared by Supersonic Particles Deposition

被引：3

作者：

Wang, X. M. ^{[1
]}

Zhu, S. ^{[1
]}

Han, G. F. ^{[1
]}

Chang, Q. ^{[1
]}

机构：

[1] Acad Armored Force Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China

来源：

INTERNATIONAL FEDERATION FOR HEAT TREATMENT AND SURFACE ENGINEERING (20TH CONGRESS) | 2013年 / 50卷

关键词：

Magnesium alloy; Supersonic particles deposition; Microstructure; Mechanical properties; Formation mechanism;

D O I：

10.1016/j.phpro.2013.11.042

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

Al-Si coating on the surface of AZ81E magnesium alloy was fabricated by Supersonic Particles Deposition, then microstructure observation, micro-hardness testing, bonding strength measurement and formation mechanism analysis of the deposited coating were accomplished by relative analytical technique, respectively. The results elucidated that Al-Si coating on magnesium alloy surface prepared by Supersonic Particles Deposition was formed via the integrated combination of mechanical bonding and metallurgical bonding. The coating was compacted and its hardness was about 1.8 times to that of the substrate. Average bonding strength of the interface was above 40MPa. (C) 2013 The Authors. Published by Elsevier B.V.

引用

页码：267 / 271

页数：5

共 50 条

[21] Development and Characterization of Al-Based Amorphous Coating
Jiangbo Cheng
Yuan Feng
Chen Yan
Xianlong Hu
Ruifeng Li
Xiubing Liang
JOM, 2020, 72 : 745 - 753
[22] Erratum to: Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles
A.K. Chaubey
S. Scudino
N.K. Mukhopadhyay
J. Eckert
Journal of Materials Research, 2016, 31 : 1372 - 1372
[23] Investigation on melting phenomena generated during dynamic formation of Al-based coating on magnesium alloy
Wang Xiaoming
Zhu Sheng
Feng Xueqiang
Liu Yuxiang
MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2014, 488-489 : 189 - +
[24] Microstructure and mechanical properties of the (Fe,Ni)Al-based alloy produced by SLM and HIP of spherical composite powder
Kaplanskii, Yu Yu
Sentyurina, Zh A.
Loginov, P. A.
Levashov, E. A.
Korotitskiy, A., V
Travyanov, A. Yu
Petrovskii, P., V
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 743 : 567 - 580
[25] Microstructure, Mechanical Properties and Corrosion Behavior of the Aluminum Alloy Components Repaired by Cold Spray with Al-Based Powders
Zhang, Zhiyi
Sun, Xiaoguang
Huang, Shiming
Han, Xiaohui
Zhu, Ping
Shi, Chunyuan
Zhang, Tengfei
METALS, 2021, 11 (10)
[26] Effects of Sintering Temperature on Densification, Microstructure and Mechanical Properties of Al-Based Alloy by High-Velocity Compaction
Yuan, Xianjie
Qu, Xuanhui
Yin, Haiqing
Feng, Zaiqiang
Tang, Mingqi
Yan, Zhenwei
Tan, Zhaojun
METALS, 2021, 11 (02) : 1 - 11
[27] Microstructure and cavitation erosion characteristics of Al-Si alloy coating prepared by electrospark deposition
Wang, Wei-fu
Wang, Mao-cai
Sun, Feng-jiu
Zheng, Yu-gui
Jiao, Jian-min
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (21): : 5116 - 5121
[28] Microstructure and wear properties of Al-based bearing alloys fabricated by mechanical alloying
School of Mechanical Engineering, South China Univ. of Tech., Guangzhou 510640, China
Huanan Ligong Daxue Xuebao, 2007, 10 (37-43):
[29] Microstructure and property characterization of Al-based composites reinforced with CuZrAl particles fabricated by mechanical alloying and spark plasma sintering
Zhang, Lanxiang
Li, Boyu
Wu, Hao
Wang, Wen
Zhai, Sicheng
Xu, Juan
Niu, Zuozhe
Wang, Yan
ADVANCED POWDER TECHNOLOGY, 2018, 29 (07) : 1695 - 1702
[30] Corrosion resistance of Al-based coating prepared by arc spraying
Wei, Qi
Ren, Chun-Ling
Cui, Li
Li, Zhuo-Xin
Hanjie Xuebao/Transactions of the China Welding Institution, 2006, 27 (11): : 5 - 8

← 1 2 3 4 5 →