Microstructure characterization and mechanical properties of Al-based coating on magnesium alloy prepared by Supersonic Particles Deposition

被引:3
|
作者
Wang, X. M. [1 ]
Zhu, S. [1 ]
Han, G. F. [1 ]
Chang, Q. [1 ]
机构
[1] Acad Armored Force Engn, Natl Key Lab Remfg, Beijing 100072, Peoples R China
关键词
Magnesium alloy; Supersonic particles deposition; Microstructure; Mechanical properties; Formation mechanism;
D O I
10.1016/j.phpro.2013.11.042
中图分类号
O414.1 [热力学];
学科分类号
摘要
Al-Si coating on the surface of AZ81E magnesium alloy was fabricated by Supersonic Particles Deposition, then microstructure observation, micro-hardness testing, bonding strength measurement and formation mechanism analysis of the deposited coating were accomplished by relative analytical technique, respectively. The results elucidated that Al-Si coating on magnesium alloy surface prepared by Supersonic Particles Deposition was formed via the integrated combination of mechanical bonding and metallurgical bonding. The coating was compacted and its hardness was about 1.8 times to that of the substrate. Average bonding strength of the interface was above 40MPa. (C) 2013 The Authors. Published by Elsevier B.V.
引用
收藏
页码:267 / 271
页数:5
相关论文
共 50 条
  • [1] Microstructure and Properties of Al-Based Ceramic Coating Deposited on Magnesium Alloy Surface by Cold Spraying
    Ci, Shiwei
    Wang, Ting
    Hu, Jiaqi
    Cheng, Zonghui
    Xie, Suijie
    Cai, Xiaoye
    Dong, Dingping
    Fan, Chao
    Liu, Qingwei
    Yuan, Chenfeng
    Du, Wenbo
    Han, Guofeng
    Zhu, Sheng
    Chen, Dexin
    Wang, Qiwei
    COATINGS, 2023, 13 (04)
  • [2] Study on Microstructure and mechanical properties of Cold Spraying Al coating on Magnesium Alloy
    Liu, Yuliang
    Li, Xiangli
    Zhang, Qing
    Xu, Chunhua
    PROCEEDINGS OF THE 2015 INTERNATIONAL POWER, ELECTRONICS AND MATERIALS ENGINEERING CONFERENCE, 2015, 17 : 210 - 213
  • [3] Microstructure Characterization and Tribological Properties Evaluation on WC/Cu Composite Coating Prepared by Supersonic Laser Deposition
    Huang X.
    Wu L.
    Li B.
    Wang W.
    Zhang Q.
    Kovalenko V.S.
    Yao J.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2020, 56 (10): : 78 - 85
  • [4] Microstructure and Mechanical Properties of Magnesium Alloy Prepared by Repetitive Upsetting
    Guo, Wei
    Wang, Qudong
    Liu, Manping
    Liu, Xintao
    Zhou, Hao
    THERMEC 2011, PTS 1-4, 2012, 706-709 : 1261 - 1266
  • [5] The properties and microstructure of Al-based composites reinforced with ceramic particles
    Smagorinski, ME
    Tsantrizos, PG
    Grenier, S
    Brzezinski, T
    Kim, G
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 244 (01): : 86 - 90
  • [6] Influence of directional microstructure on mechanical properties in Al-based ultrafine bimodal lamellar structured alloy
    Kim J.
    Hong S.H.
    Eckert J.
    Kim K.B.
    Material Design and Processing Communications, 2019, 1 (02):
  • [7] Microstructure and Mechanical Properties of the AlCoTi Amorphous Coating for Magnesium Alloy Remanufacturing
    Wang, Xiuyu
    Cheng, Jiangbo
    Ge, Yunyun
    Zhang, Baosen
    Liang, Xiubing
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2023, 59 (07): : 367 - 374
  • [8] Microstructure and mechanical properties of magnesium alloy prepared by lost foam casting
    Tian, XF
    Fan, ZT
    Huang, NY
    Wu, HB
    Dong, XP
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2005, 15 (01) : 7 - 13
  • [9] Microstructure and mechanical properties of magnesium alloy prepared by lost foam casting
    田学锋
    樊自田
    黄乃瑜
    吴和保
    董选普
    Transactions of Nonferrous Metals Society of China, 2005, (01) : 7 - 13
  • [10] Microstructure and properties of Al-coating on AZ31 magnesium alloy prepared by pack-cementation
    Hu, Jian-jun
    Liao, Jing
    Yang, Xian
    Zeng, Jing
    Li, Hui
    Song, Bo
    Xu, Hong-bin
    Guo, Ning
    Jin, Yan
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2022, 32 (02) : 493 - 502