KINETICS AND CONTROL OF SCALING FOR REDUCED SURFACE DECARBURIZATION OF SPRING STEELS

被引：0

作者：

Anghelina, Dorel ^{[1
]}

Kienreich, Robert ^{[2
]}

Zamberger, Sabine ^{[3
]}

Zamberger, Joerg ^{[4
]}

Kozeschnik, Ernst ^{[5
]}

Schneider, Reinhold

机构：

[1] Univ Leoben, Chair Met, Leoben, Austria

[2] Voestalpine Austria Draht, Donawitz, Austria

[3] Voestalpine Stahl, Donawitz, Austria

[4] Styria Federn Judenburg, Judenburg, Austria

[5] Vienna Univ Technol, Inst Mat Sci & Technol, Vienna, Austria

来源：

METALURGIA INTERNATIONAL | 2010年 / 15卷 / 05期

关键词：

surface decarburization; oxygen partial pressure; gas composition; scale layer thickness; scale phase change; CARBON;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

Scale formation control is important in order to optimize the steel surface quality in a balance between metal yield losses and low decarburization depth. In this study, the case of billets reheating in CH(4)-based off-gas is considered, namely including a model for the oxygen partial pressure. The results from thermo-gravimetric experiments and metallographic studies are discussed, showing how the atmosphere, steel composition and the reheating pattern influence the amount, structure and composition of the oxide layer. Some possible ways of oxidation protection are also investigated.

引用

页码：5 / 8

页数：4

共 50 条

[21] Evolution during Hot Rolling and Control by Thermomechanical Control Process of Surface Decarburization on 38Si7 Spring Steel
Liu, Jiaxing
Jiang, Bo
Zhang, Chaolei
Li, Guizhi
Dai, Yonggang
Chen, Lie
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (11) : 8677 - 8686
[22] INVESTIGATION OF DECARBURIZATION AND SCALING IN R6M5 AND R18 STEELS
SMOLYAKO.VF
MININZON, RD
STEEL IN THE USSR, 1973, 3 (08): : 684 - 686
[23] Control of carburization and decarburization processes of alloy steels at thermochemical and thermal treatment
Mishchenko, Valeriy
Menyaylo, Aleksandr
Metallurgical and Mining Industry, 2015, 7 (11): : 244 - 249
[24] Kinetics of Surface Segregation in IF Steels
Kraynikov, O. V.
Shchigolev, V. V.
METALLOFIZIKA I NOVEISHIE TEKHNOLOGII, 2009, 31 (12): : 1669 - 1681
[25] Influence of Carbide Morphology and Microstructure on the Kinetics of Superficial Decarburization of C-Mn Steels
Alvarenga, Henrique Duarte
Van De Putte, Tom
Van Steenberge, Nele
Sietsma, Jilt
Terryn, Herman
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (01): : 123 - 133
[26] DECARBURIZATION KINETICS IN THE DH PROCESS FOR PRODUCTION OF ULTRA-LOW CARBON-STEELS
POVOLOTSKII, DY
TOKOVOI, OK
MALKOV, IV
RUSSIAN METALLURGY, 1989, (05): : 89 - 92
[27] Influence of Carbide Morphology and Microstructure on the Kinetics of Superficial Decarburization of C-Mn Steels
Henrique Duarte Alvarenga
Tom Van De Putte
Nele Van Steenberge
Jilt Sietsma
Herman Terryn
Metallurgical and Materials Transactions A, 2015, 46 : 123 - 133
[28] Kinetics and Mechanism of Decarburization and Melting of Direct-Reduced Iron Pellets in Slag
Li, Jianghua
Barati, Mansoor
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2009, 40 (01): : 17 - 24
[29] Kinetics and Mechanism of Decarburization and Melting of Direct-Reduced Iron Pellets in Slag
Jianghua Li
Mansoor Barati
Metallurgical and Materials Transactions B, 2009, 40 : 17 - 24
[30] KINETICS OF DECARBURIZATION OF LOW-CARBON LIQUID-IRON UNDER REDUCED PRESSURES
HARASHIMA, K
MIZOGUCHI, S
KAJIOKA, H
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1988, 74 (03): : 449 - 456

← 1 2 3 4 5 →