3D PRINTING OF LARGE PARTS USING MULTIPLE COLLABORATIVE DEPOSITION HEADS - A CASE STUDY WITH FDM

被引：5

作者：

Leite, Marco ^{[1
]}

Ventura, Rodrigo ^{[2
]}

Boto, Joao ^{[1
]}

Frutuoso, Nuno ^{[2
]}

Reis, Luis ^{[1
]}

Soares, Bruno ^{[3
]}

Ribeiro, Antonio Relogio ^{[1
]}

机构：

[1] Univ Lisbon, Inst Super Tecn, IDMEC, Lisbon, Portugal

[2] Univ Lisbon, Inst Super Tecn, ISR Lisboa, Lisbon, Portugal

[3] Univ Nova Lisboa, UNIDEMI, FCT, Lisbon, Portugal

来源：

PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON PROGRESS IN ADDITIVE MANUFACTURING | 2018年

关键词：

3D printing; PLA; Mechanical properties; Water absorption; Printing parameters;

D O I：

10.25341/D4WS3X

中图分类号：

R318 [生物医学工程];

学科分类号：

0831 ;

摘要：

The objective of this work is to identify the challenges for the manufacturing of a large part with special focus on the fused modelling deposition (FDM) and to propose one solution for multiple collaborative deposition heads. A trilemma is identified among the build time, the quality and the dimensions of the parts. Current proposals to address this trilemma are evaluated.

引用

页码：377 / 382

页数：6

共 50 条

[31] 3D printing in graphic design education: Educational experiences using Fused Deposition Modeling (FDM) in a Brazilian university
de Sampaio, C. P.
Spinosa, R. M. de O.
Vicentin, J.
Tsukahara, D. Y.
da Silva, J. C.
Borghi, S. L. S.
Rostirolla, F.
HIGH VALUE MANUFACTURING: ADVANCED RESEARCH IN VIRTUAL AND RAPID PROTOTYPING, 2014, : 25 - 30
[32] Intensity Modulated Radiotherapy (IMRT) Phantom Fabrication Using Fused Deposition Modeling (FDM) 3D Printing Technique
Paul Bustillo, John
Tumlos, Roy
Zandro Remoto, Randal
WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING 2018, VOL 3, 2019, 68 (03): : 509 - 515
[33] Mathematical Modelling of Fused Deposition Modeling (FDM) 3D Printing of Poly Vinyl Alcohol Parts through Statistical Design of Experiments Approach
Moradi, Mahmoud
Karamimoghadam, Mojtaba
Meiabadi, Saleh
Casalino, Giuseppe
Ghaleeh, Mohammad
Baby, Bobymon
Ganapathi, Harikrishna
Jose, Jomal
Abdulla, Muhammed Shahzad
Tallon, Paul
Shamsborhan, Mahmoud
Rezayat, Mohammad
Paul, Satyam
Khodadad, Davood
MATHEMATICS, 2023, 11 (13)
[34] Fused deposition modelling (FDM) based 3D & 4D Printing: A state of art review
Sharma, Ankit
Rai, Aryan
MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 367 - 372
[35] Printing 3D objects with interlocking parts
Song, Peng
Fu, Zhongqi
Liu, Ligang
Fu, Chi-Wing
COMPUTER AIDED GEOMETRIC DESIGN, 2015, 35-36 : 137 - 148
[36] Considerations on 3D printing joints parts
Zapciu, A.
Tasca, G. D.
Amza, C. G.
MODTECH INTERNATIONAL CONFERENCE - MODERN TECHNOLOGIES IN INDUSTRIAL ENGINEERING VI (MODTECH 2018), 2018, 400
[37] Natural fibers reinforced FDM 3D printing filaments
Deb, Disha
Jafferson, J. M.
MATERIALS TODAY-PROCEEDINGS, 2021, 46 : 1308 - 1318
[38] Print On Air: FDM 3D Printing Without Supports
Fazzini, Gianfranco
Paolini, Paola
Paolucci, Romina
Chiulli, Daniela
Barile, Gianluca
Leoni, Alfiero
Muttillo, Mirco
Pantoli, Leonardo
Ferri, Giuseppe
2019 IEEE INTERNATIONAL WORKSHOP ON METROLOGY FOR INDUSTRY 4.0 AND INTERNET OF THINGS (METROIND4.0&IOT), 2019, : 350 - 354
[39] FDM 3D PRINTING TECHNOLOGY IN MANUFACTURING COMPOSITE ELEMENTS
Dudek, P.
ARCHIVES OF METALLURGY AND MATERIALS, 2013, 58 (04) : 1415 - 1418
[40] Building body parts with 3D printing
Nathan, Stuart
Engineer, 2010, 24-MAY

← 1 2 3 4 5 →