Outdoor exposure test on prepainted 55%Al-Zn coated steel sheet subjected in 15-year

被引：2

作者：

Nomura, H ^{[1
]}

Kanai, H ^{[1
]}

Takasugi, M ^{[1
]}

机构：

[1] Nippon Steel Corp Ltd, Steel Res Labs, Futtsu 2938511, Japan

来源：

TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN | 2003年 / 89卷 / 01期

关键词：

55%Al-Zn coated steel sheet; prepainted steel sheet; corrosion; edge creep; outdoor exposure;

D O I：

10.2355/tetsutohagane1955.89.1_196

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

We carried out a 15-year outdoor exposure test to investigate the corrosion behavior of prepainted 55%Al-Zn coated steel sheet in comparison with prepainted galvanized steel sheet. The edge creep of prepainted 55%Al-Zn coated steel sheet is larger than that of prepainted galvanized steel sheet in the early stages of the exposure test. However, the progress of edge creep of prepainted 55%Al-Zn coated steel sheet slows down year,after year then stopps, while that of prepainted galvanized steel sheet remains almost constant. The edge creep widths of both sheets were almost the same at 6 to 8 years. After that point, the edge creep width of prepainted 55%Al-Zn coated steel sheet was smaller than that of prepainted galvanized steel sheet. Also, the scribed part and T-bend part of prepainted 55%Al-Zn coated steel sheet shows better corrosion resistance than those of prepainted galvanized steel sheet. The effect of pretreatment and primer on the corrosion of prepainted 55%Al-Zn coated steel sheet was not clearly noticed.

引用

页码：196 / 203

页数：8

共 49 条

[1] EDGE CREEP OF PREPAINTED ZN-55-PERCENT-AL COATED STEEL SHEET
OKA, J
TAKASUGI, M
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1991, 77 (07): : 1130 - 1137
[2] PROPERTIES AND USES OF BARE AND PREPAINTED 55-PERCENT AL-ZN ALLOY COATED STEEL
HARVEY, GJ
REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1990, 87 (02): : 183 - 191
[3] Development and application of 55% Al-Zn alloy coated steel sheet
Deng, Zhi
Wnag, Xianjin
Kang T'ieh/Iron and Steel (Peking), 1994, 29 (04): : 78 - 82
[4] New record for 55% Al-Zn coated sheet steel production
不详
MATERIALS PERFORMANCE, 1998, 37 (05) : 14 - 15
[5] Cut Edge Corrosion Inhibition by Chromate in Primer of Prepainted 55% Al-Zn Alloy Coated Steel
Chiba, Aya
Muto, Izumi
Hara, Nobuyoshi
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2011, 158 (03) : C42 - C47
[6] Worldwide acceptance of 55% Al-Zn coated sheet steel continues to grow
不详
MATERIALS PERFORMANCE, 1996, 35 (12) : 7 - 7
[7] 25-YEAR CORROSION TESTS OF 55-PERCENT AL-ZN ALLOY COATED STEEL SHEET
TOWNSEND, HE
MATERIALS PERFORMANCE, 1993, 32 (04) : 68 - 71
[8] ATMOSPHERIC CORROSION-RESISTANCE OF 55-PERCENT AL-ZN COATED SHEET STEEL - 13-YEAR TEST-RESULTS
TOWNSEND, HE
ZOCCOLA, JC
MATERIALS PERFORMANCE, 1979, 18 (10) : 13 - 20
[9] Cut Edge Corrosion Mechanism of Prepainted Zn Coated and 55%Al-Zn Coated Steels and the Role of Chromate in the Primer Coating
Nishikata, Atsushi
Tsuda, Toyoshi
Tsuru, Tooru
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2009, 95 (07): : 35 - 42
[10] UNDER VEHICLE CORROSION-RESISTANCE OF 55-PERCENT AL-ZN COATED STEEL SHEET
ALLEGRA, L
TOWNSEND, HE
METAL PROGRESS, 1981, 119 (05): : 33 - 35

← 1 2 3 4 5 →