Cross linked coacervates of cashew gum and gelatin in the encapsulation of pequi oil

Pequi oil is rich in bioactive compounds which can be encapsulated to increase protection against extrinsic environmental factors. A delayed degradation of pequi oil may occur by using microencapsulation technology, in addition to masking unpleasant flavors and aromas. Complex coacervation is a technique based on the electrostatic interaction between two oppositely charged biopolymers which form a matrix complexed around an agent of interest. However, cross-linking the particles is often necessary in order to make them more rigid. The objective of this research was to produce and characterize pequi oil microparticles in a cashew gum (CG) and gelatin (GE) matrix cross-linked with tannic acid. Cross-linked pequi oil microparticles were produced by varying the concentrations of biopolymers (0.5% to 1.5%) and tannic acid (0.3% to 8.1%) using a rotational central compound design. Ratio of cashew gum, gelatin and oil was 2:1:1 (m/m/m);respectively, at pH 4.5. The cross-linking process was performed with tannic acid for 30 minutes at 40 degrees C. The optimized formulation by means of the rotational central compound design for microparticle formation was 0.65% biopolymers (CG and GE) and 6.9% tannic acid. Increasing the tannic acid percentage in the cross-linking of the pequi oil particles had a higher yield and encapsulation efficiency. Cross-linking provided an increase in the degradation temperature of'material: and consequently, improved the thermal stability of the particles. The cross-linking process was advantageous in producing the microparticles.