Patterning of amorphous and polycrystalline Ni78B14Si8 with a focused-ion-beam

被引:27
|
作者
Li, Wuxia
Minev, Roussi
Dimov, Stefan
Lalev, Georgi
机构
[1] UCL, London Ctr Nanotechnol, London WC1E 7JE, England
[2] Cardiff Univ, Mfg Engn Ctr, Cardiff CF24 3AA, Wales
基金
英国工程与自然科学研究理事会;
关键词
focused-ion-beam; patterning; Ni78B14Si8; alloys; micro/nano-tooling;
D O I
10.1016/j.apsusc.2006.12.018
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
The machining response of amorphous and crystalline Ni78B14Si8 was investigated when structuring substrates using focused-ion-beam (FIB) milling. In particular, the sputtering yield as a function of the scan speed, and the effects of ion fluence and scan speed on the milled depth were studied. The ion fluence dependent evolution of the cross-sectional profiles of trenches was examined by atomic force microscopy (AFM). When milling amorphous Ni78B14Si8 it was found that the sputtering yield first decreased with increasing the beam scan speed, then kept constant within the scan speed range, up to 710 nm/s, investigated in this work; it was also found that the milled depth was almost proportional to the ion beam fluence. The patterning of polycrystalline Ni78B14Si8 resulted in anisotropic milling-rates due to the varying orientation of the grains in the material. The analysis of the profile evolution in both materials indicated that the surface finish of trenches was scan speed, ion beam fluence and scan strategy dependent. The study demonstrated that direct patterning by FIB could be used for producing masters in amorphous Ni-based alloys for injection moulding and hot embossing. (C) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:5404 / 5410
页数:7
相关论文
共 50 条
  • [31] Amorphous Se75Ge25 resist profile simulation of focused-ion-beam lithography
    Lee, HY
    Chung, HB
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1997, 36 (4A): : 2409 - 2414
  • [32] MAGNETIC-PERMEABILITY RELAXATION IN NEARLY ZERO-MAGNETOSTRICTIVE AMORPHOUS (FE0.1NI0.35CO0.55)78SI8B14 AND (FE0.1NI0.5CO0.4)78SI8B14 ALLOYS
    ZHANG, YZ
    DONG, C
    ZHANG, DP
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1985, 51 (1-3) : 75 - 82
  • [33] STORED ENERGY OF THE DEFORMED METALLIC-GLASS NI78SI8B14
    JESSEN, B
    WOLDT, E
    THERMOCHIMICA ACTA, 1989, 151 : 179 - 186
  • [34] The growth of metastable fcc Fe78Ni22 thin films on H-Si(100) substrates suitable for focused ion beam direct magnetic patterning
    Gloss, Jonas
    Horky, Michal
    Krizakova, Viola
    Flajsman, Lukas
    Schmid, Michael
    Urbanek, Michal
    Varga, Peter
    APPLIED SURFACE SCIENCE, 2019, 469 : 747 - 752
  • [35] ANOMALOUS MAGNETIC AFTEREFFECT IN AMORPHOUS (FE-CO)78SI8B14 ALLOY
    JAGIELINSKI, T
    WALECKI, T
    PHYSICA STATUS SOLIDI A-APPLIED RESEARCH, 1980, 60 (01): : K31 - K33
  • [36] THE THERMOPOWER OF THE AMORPHOUS-ALLOYS CO80P20,NI76SI12B12,NI78SI8B14 AND NI80SI10B10 AS A FUNCTION OF TEMPERATURE
    FRITSCH, G
    POLLICH, W
    DYCKHOFF, W
    SCHULTE, A
    ECKERT, A
    LUSCHER, E
    JOURNAL OF NON-CRYSTALLINE SOLIDS, 1985, 74 (2-3) : 259 - 269
  • [37] Order-disorder transition of anodic alumina nanochannel arrays grown under the guidance of focused-ion-beam patterning
    Liu, CY
    Datta, A
    Liu, NW
    Peng, CY
    Wang, YL
    APPLIED PHYSICS LETTERS, 2004, 84 (14) : 2509 - 2511
  • [38] Patterning of self-oriented nanocrystals in an amorphous alloy under focused ion beam irradiation
    Kamibayashi, Y
    Kamikawa, T
    Takashima, K
    Higo, Y
    Metastable, Mechanically Alloyed and Nanocrystalline Materials, 2005, 24-25 : 483 - 486
  • [39] COMPOSITION DEPENDENCE OF CURIE TEMPERATURES OF (FE, NI)78SI8B14 METALLIC GLASSES
    KOMATSU, T
    MATUSITA, K
    JOURNAL OF MATERIALS SCIENCE LETTERS, 1986, 5 (03) : 311 - 312
  • [40] MOSSBAUER STUDY OF AMORPHOUS CO78-XFEXB14SI8 ALLOYS
    LI, GD
    LI, S
    LI, DX
    NI, QH
    ZHUANG, Y
    KEXUE TONGBAO, 1984, 29 (12): : 1590 - 1595