Design and verify a natural frequency using ANSYS software

被引：2

作者：

Kukreja, Nitin ^{[1
]}

Singhal, Piyush ^{[1
]}

机构：

[1] GLA Univ, Dept Mech Engn, Mathura, India

来源：

MATERIALS TODAY-PROCEEDINGS | 2021年 / 45卷

关键词：

Milling spindle; ANSYS; Finite element analysis; FFT analyzer;

D O I：

10.1016/j.matpr.2020.12.386

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper we determine the natural frequency of highest speed milling spindle for length 335.4 mm and 16000 rpm speed based on modal analysis. This manuscript taking the high speed milling spindle of bar that is derived and presented by using finite element model in ANSYS software. This method takes into account bearing support contact interface that is recognized by spring damper element COMBIN 14 for giving cushioning effect to spindle. Furthermore, the modal analysis has completed by means of ANSYS commercial software. After that this result is compared with experimental result provided by FFT analyzer. The results show that the natural resonance region speed is far greater than the designed milling spindle. (c) 2021 Elsevier Ltd. All rights reserved. Selection and peer-review under responsibility of the scientific committee of the International Conference on Advances in Materials Research-2019.

引用

页码：3255 / 3258

页数：4

共 50 条

[41] Turboshaft engine compressor design using ANSYS
Yan H.
Zhou B.
Li H.
Zhang Y.
Lan X.
Qinghua Daxue Xuebao/Journal of Tsinghua University, 2022, 62 (03): : 549 - 554and580
[42] Using Safety Contracts to Verify Design Assumptions During Runtime
Jaradat, Omar
Punnekkat, Sasikumar
RELIABLE SOFTWARE TECHNOLOGIES - ADA-EUROPE 2018, 2018, 10873 : 3 - 18
[43] Trust but Verify: The Introduction of Plagiarism Detection Software
Roach, E. Steve
Gospe, Sid
Yu-Tze Ng
Sahin, Mustafa
PEDIATRIC NEUROLOGY, 2014, 50 (04) : 287 - 287
[44] THE DEVELOPMENT AND EVALUATION OF SOFTWARE TO VERIFY DIAGNOSTIC ACCURACY
Jensen, Rodrigo
Lopes, Maria Helena Baena de Moraes
Silveira, Paulo Sergio Panse
Ortega, Neli Regina Siqueira
REVISTA DA ESCOLA DE ENFERMAGEM DA USP, 2012, 46 (01) : 178 - 185
[45] To verify robot software, look at manufacturing context
Troxell, Wade O.
CIM Review, 1990, 6 (03):
[46] Optimization Design of the Composite Hub Connection Structure Based on ANSYS Software Technology
Sun, Hua
MANUFACTURING ENGINEERING AND AUTOMATION I, PTS 1-3, 2011, 139-141 : 1068 - 1072
[47] Software for CATV design and frequency plan optimization
Hala, Ondrej
RADIOENGINEERING, 2007, 16 (03) : 91 - 95
[48] Analyzing BlobFlow: A Case Study Using Model Checking to Verify Parallel Scientific Software
Siegel, Stephen F.
Rossi, Louis F.
RECENT ADVANCES IN PARALLEL VIRTUAL MACHINE AND MESSAGE PASSING INTERFACE, 2008, 5205 : 274 - +
[49] CONTACTS EROSION MODELLING USING ANSYS COMPUTER SOFTWARE AND EXPERIMENTAL RESEARCH
Borkowski, P.
Sienicki, A.
ARCHIVES OF METALLURGY AND MATERIALS, 2015, 60 (02) : 551 - 560
[50] Aerodynamic Analysis on the Effects of Frontal Deflector on a Truck by using Ansys Software
Varadarajoo, Pavin Kumaar
Ishak, Izuan Amin
Maji, Daniel Syafiq Baharol
Maruai, Nurshafinaz Mohd
Khalid, Amir
Mohamed, Norirda
INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 2022, 14 (06): : 77 - 87

← 1 2 3 4 5 →