A study on the performance of a newly designed heat pump calorimeter

被引：2

作者：

Amoabeng, Kofi Owura ^{[1
]}

Choi, Jong Min ^{[2
]}

机构：

[1] Hanbat Natl Univ, Grad Sch Mech Engn, Daejeon 34158, South Korea

[2] Hanbat Natl Univ, Dept Mech Engn, Daejeon 34158, South Korea

来源：

APPLIED THERMAL ENGINEERING | 2017年 / 123卷

关键词：

Heat pump; Calorimeter; Energy consumption; Entering water temperature; Heat recovery; REFRIGERATION SYSTEM; OPTIMIZATION; COMPRESSOR; EVAPORATOR; EJECTOR;

D O I：

10.1016/j.applthermaleng.2017.05.029

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The heat pump calorimeter is the testing facility to investigate the performance of a heat pump using standard test conditions obtained from domestic or international standard organizations. Conventionally, the calorimeter consumes so much energy in order to control and maintain the entering water temperature test conditions of the water-to-water heat pump unit. To minimize this energy, a newly designed calorimeter for the water-to-water heat pump was proposed in this study. Experiments were conducted in both heating and cooling modes with variation in capacity and COP of heat pump unit. In heating mode, entering water temperature test conditions of 40 degrees C and 5 degrees C were set for the indoor heat exchanger and outdoor heat exchanger of the heat pump unit respectively. In cooling mode, entering water temperature of 25 degrees C and 12 degrees C were set for the outdoor heat exchanger and indoor heat exchanger of the heat pump unit respectively. The analysis of the test results from the experiment showed that the newly designed calorimeter was able to save about 75% or more of the total power consumption comparing with the conventional calorimeter for all heat pump capacity and COP that were investigated. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：216 / 225

页数：10

共 50 条

[21] Experiment study on performance of air source heat pump
Shi, Weixiu
Pan, Lisheng
[J]. ENERGY AND POWER TECHNOLOGY, PTS 1 AND 2, 2013, 805-806 : 645 - +
[22] Experimental Study on the Performance of a Solar Heat Pump System
Z. Zhang
Y. L. Lang
S. Mehendale
C. Y. Zhang
Y. Chen
J. J. Tian
[J]. Journal of Engineering Thermophysics, 2022, 31 : 156 - 172
[23] Experimental Study on the Performance of a Solar Heat Pump System
Zhang, Z.
Lang, Y. L.
Mehendale, S.
Zhang, C. Y.
Chen, Y.
Tian, J. J.
[J]. JOURNAL OF ENGINEERING THERMOPHYSICS, 2022, 31 (01) : 156 - 172
[24] Heat flow measurements with the newly designed FIELAX Heat Flow Probe
Nehmiz, W.
Kaul, N.
Rogenhagen, J.
[J]. OCEANS 2009 - EUROPE, VOLS 1 AND 2, 2009, : 1073 - +
[25] Spectroscopic performance of newly designed CdTe detectors
Perillo, E
Auricchio, N
Caroli, E
Donati, A
Dusi, W
Fougeres, P
Hage-Ali, M
Landini, G
Siffert, P
[J]. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT, 2001, 458 (1-2): : 233 - 241
[26] Experimental investigation on vapor injection heat pump with a newly designed twin rotary variable speed compressor for cold regions
Yan, Gang
Jia, Qinglei
Bai, Tao
[J]. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2016, 62 : 232 - 241
[27] Study on improvement of compactness of a plate heat exchanger using a newly designed primary surface
Doo, J. H.
Yoon, H. S.
Ha, M. Y.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (25-26) : 5733 - 5746
[28] Study of impact of voltage gain of comparator on performance of newly designed functional generator
Sotner, Roman
Jerabek, Jan
Herencsar, Norbert
[J]. OPTIK, 2018, 172 : 203 - 219
[29] Improving body posture while fueling with a newly designed pump nozzle
Sayyahi, Zoleikha
Mirzaei, Ramazan
Mirkazemi, Roksana
[J]. INTERNATIONAL JOURNAL OF OCCUPATIONAL SAFETY AND ERGONOMICS, 2016, 22 (03) : 327 - 332
[30] Study on a high-performance heat-driven thermoacoustic heat pump
Hu, Yiwei
Chi, Jiaxin
Wu, Zhanghua
Zhang, Limin
Yang, Rui
Xu, Jingyuan
Luo, Ercang
[J]. APPLIED THERMAL ENGINEERING, 2024, 253

← 1 2 3 4 5 →