Optimum Silane Treatment for the Adhesively Bonded Aluminum Adherends at the Cryogenic Temperature

被引：30

作者：

Kim, Jin Gyu ^{[1
]}

Park, Sang Wook ^{[1
]}

Yoon, Soon Ho ^{[1
]}

Lee, Dai Gil ^{[1
]}

机构：

[1] Korea Adv Inst Sci & Technol, Dept Mech Engn, Taejon 305701, South Korea

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2010年 / 24卷 / 04期

关键词：

Silane treatment; aluminum joint; single-lap joint; LNG; cryogenic temperature; SURFACE; STRENGTH; IMPROVEMENT; GLASS;

D O I：

10.1163/016942409X12579497420843

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

Aluminum adherends for the adhesive joints at cryogenic application such as LNG (Liquefied Natural Gas) containment tanks were silane treated to improve bond strength of the aluminum joints. The bond strengths of the single-lap joints composed of aluminum adherends and epoxy adhesive were measured with respect to the condition of the silane solution and surface roughness obtained with grit blast. The chemical composition of the silane treated aluminum surface was analyzed by XPS (X-ray photoelectron spectroscopy). Also, contact angles of appropriate liquids on the silane treated aluminum surface were measured with respect to treatment conditions. From the experiments, the optimum treatment conditions for the aluminum adherends were obtained for the adhesive joints at the cryogenic temperature. (C) Koninklijke Brill NV, Leiden, 2010

引用

页码：775 / 787

页数：13

共 50 条

[31] Single-strap adhesively bonded joints with square or tapered adherends in tensile test conditions
Sandu, Marin
Sandu, Adriana
Constantinescu, Dan Mihai
Apostol, Dragos Alexandru
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2013, 44 : 105 - 114
[32] Using auxiliary adherends to eliminate need for grain control in fracture testing of adhesively bonded wood
Li, Yuqin
Howes, Kayla
Dillard, David A.
Frazier, Charles E.
Case, Scott W.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2021, 110
[33] Adhesively bonded assemblies with identical nondeformable adherends: modeling of the induced thermal stresses in the adhesive layer
Suhir, E
COMPOSITE INTERFACES, 1999, 6 (02) : 135 - 154
[34] Investigation of elastic stresses in an adhesively bonded single lap joint with functionally graded adherends in tension
Apalak, MK
Gunes, R
COMPOSITE STRUCTURES, 2005, 70 (04) : 444 - 467
[35] Three-dimensional stresses in adhesively bonded lap joints with non-identical adherends
Narasimhan, S
Shenoi, RA
Jeong, HK
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2004, 218 (L4) : 283 - 298
[36] Evaluation of optimum configuration of adhesively bonded reverse bent joints
Bodepudi, Revanth (br10@iitbbs.ac.in), 1600, Elsevier Ltd (77):
[37] Evaluation of optimum configuration of adhesively bonded reverse bent joints
Bodepudi, Revanth
Hughes, Darren J.
Pradhan, A. K.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2017, 77 : 78 - 84
[38] THE ADHESIVELY BONDED ALUMINUM JOINT - THE EFFECT OF PRETREATMENT ON DURABILITY
BISHOPP, JA
SIM, EK
THOMPSON, GE
WOOD, GC
JOURNAL OF ADHESION, 1988, 26 (2-3): : 237 - 263
[39] MICROWAVE PROPERTIES OF ADHESIVELY BONDED ALUMINUM FOIL SEAMS
RUEGGEBE.W
IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 1967, MT15 (02) : 117 - &
[40] Laser-based Surface Treatment of CFRP and Aluminum for Adhesively Bonded Hybrid Joints
Schanz, Jochen
Goossen, Michael
Meinhard, Dieter
Harrison, David
De Silva, Anjali
Knoblauch, Volker
Riegel, Harald
LASER-BASED MICRO- AND NANOPROCESSING XIV, 2020, 11268

← 1 2 3 4 5 →