THE WEAR TESTS OF CUTTING INSERTS WITH DIFFERENT COATINGS DURING A MILLING PROCESS

被引：0
|
作者：
Maj, Piotr [1 ]
Miko, Edward [1 ]
机构：
[1] Kielce Univ Technol, Kielce, Poland
来源：
METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2017年
关键词：
Wear of cutting inserts; milling; roughness; coatings;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The article presents the impact of cutting inserts with coatings on the roughness of the milled surface. Two types of coated steel inserts were selected for the research purpose. The first one was covered with Ti (C, N) + Al2O3 coating, while the other was TiC / TiN-CVD and Ti (C, N) + Al2O3. They were then mounted in a milling head. The process of surface milling has been subjected to C45 steel. Milling process for each inserts proceeded at the same rate of cutting. After a certain number of tool passages, the measurements of wear parameters and the roughness of the milled surface were measured. This allowed us to determine the effect of tool wear on the properties of the milling face layer.
引用
收藏
页码：1367 / 1371
页数：5
相关论文
共 50 条
  • [1] Wear mechanisms of milling inserts: Dry and wet cutting
    Gu, J
    Tung, SC
    Barber, GC
    WEAR PROCESSES IN MANUFACTURING, 1998, 1362 : 31 - 47
  • [2] Wear mechanisms of milling inserts: dry and wet cutting
    Gu, Jie
    Tung, Simon C.
    Barber, Gary C.
    ASTM Special Technical Publication, 1999, (1362): : 31 - 47
  • [3] Influence of Protective Coatings of Inserts on Cutting Forces during Milling of Hadfield Steel
    Pyatykh, A. S.
    Savilov, A. V.
    Timofeev, S. A.
    Svinin, V. M.
    Maizel, I. G.
    JOURNAL OF FRICTION AND WEAR, 2023, 44 (03) : 156 - 163
  • [4] Influence of Protective Coatings of Inserts on Cutting Forces during Milling of Hadfield Steel
    A. S. Pyatykh
    A. V. Savilov
    S. A. Timofeev
    V. M. Svinin
    I. G. Maizel
    Journal of Friction and Wear, 2023, 44 : 156 - 163
  • [5] The effect of thermal shocks on wear of exchangeable sintered carbide inserts during the cutting process
    Petru, Jana
    Zlamal, Tomas
    Mrkvica, Ivan
    Cep, Robert
    Manufacturing Technology, 2014, 14 (04): : 590 - 596
  • [6] Effect of the crystallinity of diamond coatings on cemented carbide inserts on their cutting performance in milling
    Skordaris, G.
    Bouzakis, K-D
    Kotsanis, T.
    Boumpakis, A.
    Stergioudi, E.
    Christofilos, D.
    Lemmer, O.
    Koelker, W.
    Woda, M.
    CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2019, 68 (01) : 65 - 68
  • [7] Influence of cutting edge radius on the wear resistance of PM-HSS milling inserts
    Rech, J
    Yen, YC
    Schaff, MJ
    Hamdi, H
    Altan, T
    Bouzakis, KD
    WEAR, 2005, 259 : 1168 - 1176
  • [8] Prediction of cutting tool wear during milling process using artificial intelligence techniques
    Shankar, S.
    Mohanraj, T.
    Rajasekar, R.
    INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 2019, 32 (02) : 174 - 182
  • [9] Research on the cutting heat and wear of indexable inserts with different transition surfaces
    Zheng, Min
    Gang, Tieqiang
    Yao, Bin
    Li, Fei
    Song, Yin
    AUTOMATION EQUIPMENT AND SYSTEMS, PTS 1-4, 2012, 468-471 : 1290 - 1293
  • [10] Influence of the application of wear-resistant coatings on force parameters of the cutting process and the tool life during end milling of titanium alloys
    Oganyan, Maksim
    Vereschaka, Alexey
    Volosova, Marina
    Gurin, Vladimir
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 1428 - 1432
12345