THE WEAR TESTS OF CUTTING INSERTS WITH DIFFERENT COATINGS DURING A MILLING PROCESS

被引：0

作者：

Maj, Piotr ^{[1
]}

Miko, Edward ^{[1
]}

机构：

[1] Kielce Univ Technol, Kielce, Poland

来源：

METAL 2017: 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2017年

关键词：

Wear of cutting inserts; milling; roughness; coatings;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

The article presents the impact of cutting inserts with coatings on the roughness of the milled surface. Two types of coated steel inserts were selected for the research purpose. The first one was covered with Ti (C, N) + Al2O3 coating, while the other was TiC / TiN-CVD and Ti (C, N) + Al2O3. They were then mounted in a milling head. The process of surface milling has been subjected to C45 steel. Milling process for each inserts proceeded at the same rate of cutting. After a certain number of tool passages, the measurements of wear parameters and the roughness of the milled surface were measured. This allowed us to determine the effect of tool wear on the properties of the milling face layer.

引用

页码：1367 / 1371

页数：5

共 50 条

[21] PVD coatings of cermet inserts for milling applications
DErrico, GE
Chiara, R
Guglielmi, E
SURFACE & COATINGS TECHNOLOGY, 1996, 86-7 (1-3): : 735 - 738
[22] Measurement of conformity and wear of cutting tool inserts
Weckenmann, A
Nalbantic, K
SEVENTH INTERNATIONAL SYMPOSIUM ON LASER METROLOGY APPLIED TO SCIENCE, INDUSTRY, AND EVERYDAY LIFE, PTS 1 AND 2, 2002, 4900 : 541 - 547
[23] Enhancing the wear resistance of WC-Co cutting inserts using synthetic diamond coatings
Najar, Kaleem Ahmad
Sheikh, N. A.
Butt, Mohammad Mursaleen
Shah, M. A.
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (07) : 1224 - 1233
[24] Investigation of Cutting Tool Wear in the Milling Process of the Inconel 718 Alloy
Piorkowski, Pawel
Borkowski, Wojciech
Bartoszuk, Marian
Miko, Edward
Skoczynski, Waclaw
ADVANCES IN SCIENCE AND TECHNOLOGY-RESEARCH JOURNAL, 2024, 18 (02) : 26 - 35
[25] EXPERIMENTAL STUDY REGARDING THE WORKPIECE TEMPERATURE DURING MILLING PROCESS WITH DIFFERENT CUTTING CONDITIONS
Avram, Vasile
Brabie, Gheorghe
MODTECH 2011: NEW FACE OF T.M.C.R., VOL I AND II, 2011, : 37 - 40
[26] Cutting Inserts Wear Reasons in Aluminum Machining
Radzeviciute, J.
Mikelaitis, J.
MECHANIKA 2010: PROCEEDINGS OF THE 15TH INTERNATIONAL CONFERENCE, 2010, : 372 - 375
[27] Analysis of cutting force and wear area during the wear-out of a milling cutter
Li, Xiwen
Du, Runsheng
Yang, Shuzi
Huazhong Ligong Daxue Xuebao/Journal Huazhong (Central China) University of Science and Technology, 1998, 26 (02): : 45 - 48
[28] THE EFFECT OF FEED RATE ON DURABILITY AND WEAR OF EXCHANGEABLE CUTTING INSERTS DURING CUTTING Ni-625
Petru, Jana
Zlamal, Tomas
Cep, Robert
Sadilek, Marek
Stancekova, Dana
TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2017, 24 : 1 - 6
[29] WEAR PERFORMANCE OF CERAMIC CUTTING INSERTS WHEN THE CUTTING DEPTH CHANGES
DENKENA, B
WERKSTATTSTECHNIK ZEITSCHRIFT FUR INDUSTRIELLE FERTIGUNG, 1991, 81 (10): : 585 - 588
[30] Wear reduction on cutting inserts by additional internal cooling of the cutting edge
Bleicher, Friedrich
Reiter, Manuel
15TH GLOBAL CONFERENCE ON SUSTAINABLE MANUFACTURING, 2018, 21 : 518 - 524

← 1 2 3 4 5 →