Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile

被引：5
|
作者：
He Daihua [1 ,2 ]
机构：
[1] Univ Shanghai Sci Technol, Sch Mat Sci & Engn, Shanghai 200093, Peoples R China
[2] Tongji Univ, Minist Educ, Key Lab Adv Civil Engn Mat, Shanghai 200092, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2010年 / 25卷 / 02期
关键词：
EVA; redispersible powder; latex; bonding strength; curing regime;
D O I：
10.1007/s11595-010-2346-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regime used within 28 days is critical according to the bonding strengths values under three curing regimes for different ages. The reasons of that the EVA can improve the bonding strength were analyzed.
引用
收藏
页码：346 / 348
页数：3
相关论文
共 50 条
  • [41] Effect of Hydrothermal Curing on the Hydration and Strength Development of Belite Cement Mortar Containing Industrial Wastes
    Rubinaite, Dovile
    Dambrauskas, Tadas
    Baltakys, Kestutis
    Siauciunas, Raimundas
    SUSTAINABILITY, 2023, 15 (12)
  • [42] EFFECT OF WATER CURING TEMPERATURE ON COMPRESSIVE STRENGTH DEVELOPMENT AND WATER ABSORPTION CAPACITY OF MORTAR MIXTURES
    Mardani Aghabaglou, Ali
    Ozen, Suleyman
    Altun, Muhammet Gokhan
    Faqiri, Zia Ahmad
    SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI, 2020, 38 (01): : 135 - 148
  • [43] EFFECT OF WATER/CEMENT RATIO AND CURING TIME ON COMPRESSIVE STRENGTH OF MWCNT-CEMENT MORTAR
    Kang, Donghoon
    Seo, Gang Seok
    Chung, Wonseok
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [44] Effect of Highland Barley Straw Ash on the Bonding Strength of Magnesium Oxychloride Cement Mortar
    Shu X.
    Qiao H.
    Cao F.
    Cui L.
    Cailiao Daobao/Materials Reports, 2023, 37 (23):
  • [45] Investigation on underwater bonding strength and improvement mechanism of ethylene-vinyl acetate copolymer modified mortar
    Ma, Haoda
    Tang, Jianhui
    Bai, Yin
    CONSTRUCTION AND BUILDING MATERIALS, 2024, 457
  • [46] EFFECT OF POST-CURING REGIME ON DENSITY, COMPRESSIVE STRENGTH AND CROSSLINKING OF POLYMER CONCRETE
    Khalid, Nur Hafizah A.
    Hussin, Mohd Warid
    Ismail, Mohammad
    Ismail, Mohamed A.
    Mohamed, Azman
    Ariffin, Nur Farhayu
    Lim, Nor Hasanah Abdul Shukor
    Samadi, Mostafa
    JURNAL TEKNOLOGI, 2015, 77 (12): : 31 - 35
  • [47] Bonding curing systems and bonding performance of polymer-modified mortars
    Nong, Jin-Long
    Yi, Wei-Jian
    Huang, Zheng-Yu
    Peng, Bo
    Hunan Daxue Xuebao/Journal of Hunan University Natural Sciences, 2009, 36 (07): : 6 - 11
  • [48] Effect of surface-modified fly ash on compressive strength of cement mortar
    Mironyuk, Ivan
    Tatarchuk, Tetiana
    Paliychuk, Natalia
    Heviuk, Iryna
    Horpynko, Alexander
    Yarema, Oleg
    Mykytyn, Ihor
    MATERIALS TODAY-PROCEEDINGS, 2021, 35 : 534 - 537
  • [49] Bioactive bone cement: Effect of surface curing properties on bone-bonding strength
    Shinzato, S
    Kobayashi, M
    Mousa, WF
    Kamimura, M
    Neo, M
    Choju, K
    Kokubo, T
    Nakamura, T
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2000, 53 (01): : 51 - 61
  • [50] Bond strength in mortar/ceramic tile interface—testing procedure and adequacy evaluation
    Sandro Botas
    Rosário Veiga
    Ana Velosa
    Materials and Structures, 2017, 50
12345