Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile

被引：5
|
作者：
He Daihua [1 ,2 ]
机构：
[1] Univ Shanghai Sci Technol, Sch Mat Sci & Engn, Shanghai 200093, Peoples R China
[2] Tongji Univ, Minist Educ, Key Lab Adv Civil Engn Mat, Shanghai 200092, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2010年 / 25卷 / 02期
关键词：
EVA; redispersible powder; latex; bonding strength; curing regime;
D O I：
10.1007/s11595-010-2346-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regime used within 28 days is critical according to the bonding strengths values under three curing regimes for different ages. The reasons of that the EVA can improve the bonding strength were analyzed.
引用
收藏
页码：346 / 348
页数：3
相关论文
共 50 条
  • [21] Effect of carbonation curing regime on strength and microstructure of Portland cement paste
    Chen, Tiefeng
    Gao, Xiaojian
    JOURNAL OF CO2 UTILIZATION, 2019, 34 : 74 - 86
  • [22] INFLUENCE OF SPECIMEN SIZE ON EFFECT OF CURING REGIME ON CONCRETE COMPRESSIVE STRENGTH
    SOROKA, I
    BAUM, H
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 1994, 6 (01) : 15 - 22
  • [23] Effect of microwave-assisted curing process on strength development and curing duration of cellular lightweight geopolymer mortar
    Suwan, Teewara
    Paphawasit, Boontarika
    Fan, Mizi
    Jitsangiam, Peerapong
    Chindaprasirt, Prinya
    MATERIALS AND MANUFACTURING PROCESSES, 2021, 36 (09) : 1040 - 1048
  • [24] Effect of curing conditions and formulation on the adhesive strength of stone- siporex mortar composite
    Ali, Harith E.
    Brunetaud, Xavier
    Beck, Kevin
    Belayachi, Naima
    Balawi, Malek
    NEXO REVISTA CIENTIFICA, 2023, 36 (06): : 1006 - 1019
  • [25] Effect of water curing duration on strength behaviour of portland composite cement (PCC) mortar
    Caronge, M. A.
    Tjaronge, M. W.
    Hamada, H.
    Irmawaty, R.
    GLOBAL CONGRESS ON CONSTRUCTION, MATERIAL AND STRUCTURAL ENGINEERING 2017 (GCOMSE2017), 2017, 271
  • [26] The curing times effect on the strength of ground granulated blast furnace slag (GGBFS) mortar
    Yun, Chin Mei
    Rahman, Md Rezaur
    Phing, Cherlene Yong Wee
    Chie, Anita Wong May
    Bin Bakri, Muhammad Khusairy
    CONSTRUCTION AND BUILDING MATERIALS, 2020, 260
  • [27] Effect of Microwave Curing on Mortar Properties
    Topcu, Ilker Bekir
    Toprak, M. Ugur
    Kirmizi, Abdullah
    TEKNIK DERGI, 2012, 23 (02): : 5951 - 5956
  • [28] Effect of Varying Curing Conditions on the Strength of Biopolymer Modified Sand
    Lemboye, Kehinde
    Almajed, Abdullah
    POLYMERS, 2023, 15 (07)
  • [29] Effect of chemically reactive enamel coating on bonding strength at steel/mortar interface
    Yan, Dongming
    Reis, Signo
    Tao, Xing
    Chen, Genda
    Brow, Richard K.
    Koenigstein, Mike
    CONSTRUCTION AND BUILDING MATERIALS, 2012, 28 (01) : 512 - 518
  • [30] The effect of the type of curing agent on selected properties of epoxy mortar modified with PET glycolisate
    Debska, Bernardeta
    Licholai, Lech
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 124 : 11 - 19
12345