Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile

被引：5
|
作者：
He Daihua [1 ,2 ]
机构：
[1] Univ Shanghai Sci Technol, Sch Mat Sci & Engn, Shanghai 200093, Peoples R China
[2] Tongji Univ, Minist Educ, Key Lab Adv Civil Engn Mat, Shanghai 200092, Peoples R China
来源：
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION | 2010年 / 25卷 / 02期
关键词：
EVA; redispersible powder; latex; bonding strength; curing regime;
D O I：
10.1007/s11595-010-2346-3
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Ethylene-Vinyl Acetate (EVA) redispersible powder and latex were used to modify mortar. Three kinds of curing regimes: standard curing, high temperature curing and freeze-thaw circle curing were adopted to cure the bonded samples. Bonding strength of EVA modified mortar was tested at 28 days. The development of bonding strengths under all three curing regimes were discussed and compared. The experimental results show that bonding strength increases with the increase of EVA content in mortar. The curing regime used within 28 days is critical according to the bonding strengths values under three curing regimes for different ages. The reasons of that the EVA can improve the bonding strength were analyzed.
引用
收藏
页码：346 / 348
页数：3
相关论文
共 50 条
  • [1] Effect of curing regime on bonding strength of EVA modified mortar to tile
    Daihua He
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2010, 25 : 346 - 348
  • [2] Effect of Curing Regime on Bonding Strength of EVA Modified Mortar to Tile
    何代华
    Journal of Wuhan University of Technology(Materials Science), 2010, (02) : 346 - 348
  • [3] Influence of Curing Condition on the Adhesive Strength of EVA Modified Mortar to Tile
    何代华
    Journal of Wuhan University of Technology-Materials Science Edition, 2006, (S1) : 86 - 89
  • [4] Effect of cyclic curing conditions on the tensile bond strength between the polymer modified mortar and the tile
    Li, Lei
    Liu, Ke
    Chen, Bo
    Wang, Ru
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2022, 17
  • [5] Interface Bond Mechanism of EVA-Modified Mortar and Porcelain Tile
    He, Daihua
    Wang, Peiming
    Liu, Ping
    Liu, Xinkuan
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2013, 25 (06) : 726 - 730
  • [6] Study on the adhesive strength of EVA modified mortars to Tile
    He, D. H.
    Wang, P. M.
    Zhu, H. B.
    Proceedings of the 6th International Symposium on Cement & Concrete and CANMET/ACI International Symposium on Concrete Technology for Sustainable Development, Vols 1 and 2, 2006, : 1105 - 1107
  • [7] EFFECT OF POLYMER/CEMENT RATIO AND CURING REGIME ON POLYMER MODIFIED MORTAR PROPERTIES
    Hatungimana, Daniel
    Yazici, Semsi
    Mardani-Aghabaglou, Ali
    JOURNAL OF GREEN BUILDING, 2020, 15 (03): : 177 - 193
  • [8] Effect of Thermal Cycles and Curing Age on Bonding Strength of Cement Mortar Using Manufactured Sand
    Cui, Hongzhi
    Peng, Houquan
    Yang, Weiwei
    Yang, Haibin
    Zhang, Chaohui
    Zheng, Dapeng
    BUILDINGS, 2024, 14 (03)
  • [9] Influences of 0-20°C curing systems on tensile bonding strength of polymer modified cement mortar
    Wang, P. (tjwpm@126.com), 1600, Tongji University (17):
  • [10] Curing Effect on the Strength of Cement Mortar with Bamboo Biochar
    Selvanathan, Pragalanathan
    Gunasekaran, Pravina K.
    Lai, Yeng Fock
    Anand, N.
    Chin, Siew Choo
    INTERNATIONAL JOURNAL OF NANOELECTRONICS AND MATERIALS, 2024, 17 (03): : 465 - 471
12345