Leakage current of Pt/(Ba0.7Sr0.3)TiO3 interface with dead layer -: art. no. 024106

被引:43
|
作者
Chen, B
Yang, H
Miao, J
Zhao, L
Cao, LX
Xu, B
Qiu, XG
Zhao, BR
机构
[1] Chinese Acad Sci, Inst Phys, Natl Lab Superconduct, Beijing 100080, Peoples R China
[2] Chinese Acad Sci, Ctr Condensed Matter Phys, Beijing 100080, Peoples R China
基金
中国国家自然科学基金;
关键词
D O I
10.1063/1.1828219
中图分类号
O59 [应用物理学];
学科分类号
摘要
Leakage current of Pt/(Ba0.7Sr0.3)TiO3 (BST)/YBa2Cu3O7-delta capacitors on a (001) SrTiO3 substrate was studied. By modeling a low-dielectric constant layer, a so-called dead layer, between the Pt/BST interface as a parasitic capacitor in series with the bulk layer capacitor, the leakage current of Pt/BST interface was well analyzed based on the modified Schottky emission equation. Furthermore, a two-step schematic energy band diagram is proposed to explain the carrier transport through the Pt/BST interface. (C) 2005 American Institute of Physics.
引用
收藏
页数:4
相关论文
共 50 条
  • [31] Interface potential barrier height and leakage current behavior of Pt/(Ba,Sr)TiO3/Pt capacitors fabricated by sputtering process
    Hwang, CS
    Lee, BT
    Park, SO
    Kim, JW
    Cho, HJ
    Kang, CS
    Horii, H
    Lee, SI
    Lee, MY
    INTEGRATED FERROELECTRICS, 1996, 13 (1-3) : 449 - 469
  • [32] Low-temperature fabrication of NiCuZn Ferrite-(Ba0.7Sr0.3)TiO3 composites using granulated powders
    Kitahara, Naoto
    Kageyama, Hiroaki
    Kawasaki, Tomoya
    Abe, Kazutomo
    Itoh, Hidenobu
    Takahashi, Junichi
    JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2013, 121 (1409) : 54 - 61
  • [33] Role of an intermediate phase (Ba,Sr)2Ti2O5CO3 in doped (Ba0.7Sr0.3)TiO3 thin films
    Chen, SY
    Wang, HW
    Huang, LC
    MATERIALS CHEMISTRY AND PHYSICS, 2003, 77 (03) : 632 - 638
  • [34] Structure and dielectric properties of Ca-doped (Ba0.7Sr0.3) TiO3 thin films fabricated by sol–gel method
    L. N. Gao
    X. J. Yang
    L. Y. Zhang
    X. Yao
    Journal of Electroceramics, 2008, 21 : 645 - 648
  • [35] Third-order optical nonlinearity of (Ba0.7Sr0.3)TiO3 ferroelectric thin films fabricated by soft solution processing
    Shi, P
    Yao, X
    Zhang, LY
    Wu, XQ
    Wang, MQ
    Wan, X
    SOLID STATE COMMUNICATIONS, 2005, 134 (09) : 589 - 593
  • [36] Influence of bottom electrodes and interface layers on (Ba,Sr)TiO3 thin film leakage current
    Yamato, M
    Yamada, H
    Kikkawa, T
    JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 2004, 43 (8A): : 5221 - 5230
  • [37] Ba0.7 Sr0.3 TiO3 Thin Film Dielectric Properties with Different Deposition Layer
    Chin, T. Y.
    Sauli, Z.
    Retnasamy, V
    Ramli, N.
    2013 IEEE REGIONAL SYMPOSIUM ON MICRO AND NANOELECTRONICS (RSM 2013), 2013, : 245 - 247
  • [38] Microwave dielectric relaxation of the polycrystalline (Ba, Sr)TiO3 thin films -: art. no. 182904
    Moon, T
    Lee, B
    Kim, TG
    Oh, J
    Noh, YW
    Nam, S
    Park, B
    APPLIED PHYSICS LETTERS, 2005, 86 (18) : 1 - 3
  • [39] Microwave-frequency loss and dispersion in ferroelectric Ba0.3Sr0.7TiO3 thin films -: art. no. 082908
    Booth, JC
    Takeuchi, I
    Chang, KS
    APPLIED PHYSICS LETTERS, 2005, 87 (08)
  • [40] Dielectric properties of sol–gel synthesized SrTiO3/(Ba0.7Sr0.3)TiO3 and SrTiO3/Ba(Zr0.3Ti0.7)O3 thin film heterostructures
    A. N. Tarale
    M. M. Sutar
    D. J. Salunkhe
    P. B. Joshi
    S. B. Kulkarni
    R. C. Pawar
    C. S. Lee
    D. M. Phase
    M. Gupta
    R. J. Chaudhary
    Journal of Materials Science: Materials in Electronics, 2013, 24 : 1308 - 1318