Spark-plasma sintering the 8-mol% yttria-stabilized zirconia electrolyte

被引：13
|
作者：
Yang, BC [1 ]
Jian, JW
Zhang, YC
机构：
[1] Univ Elect Sci & Technol China, Sch Microelect & Solid State Elect, Chengdu 610054, Sichuan, Peoples R China
[2] Hongtak Chengdu Elect Co Ltd, Chengdu 610041, Sichuan, Peoples R China
来源：
JOURNAL OF MATERIALS SCIENCE | 2004年 / 39卷 / 22期
关键词：
D O I：
10.1023/B:JMSC.0000045622.65071.3d
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The spark-plasma sintering (SPS) method which enables the manufacturing of dense materials in a short period at low sintering temperatures was investigated. The SPS was a technology for materials which utilizes the high energy of a high temperature plasma generated when pulsed formed electric energy was applied to the space among fine particles. The ionic conductivity was higher than that of conventional sintering (CS) between 300-850°C. The activation energy for the SPS which was estimated from the slop in the range of 400-800°C was 91 KJ mol-1 indicated that the conduction mechanism in SPS ceramics was similar to that in CS ceramics.
引用
收藏
页码：6863 / 6865
页数：3
相关论文
共 50 条
  • [31] Imaging secondary-ion mass spectroscopy observation of the scavenging of siliceous film from 8-mol%-yttria-stabilized zirconia by the addition of alumina
    Lee, Jong-Heun, 1600, American Ceramic Soc, Westerville (83):
  • [32] Effects of alumina as dopant on sintering and grain growth behavior of 9 mol% yttria-stabilized zirconia
    Liu, Tao
    Li, Lin
    Yu, Jing-Kun
    Xu, Ji-Lin
    Dongbei Daxue Xuebao/Journal of Northeastern University, 2010, 31 (08): : 1137 - 1140
  • [33] Densification of 8 mol% yttria-stabilized zirconia at low temperature by flash sintering technique for solid oxide fuel cells
    Zhang, Jing
    Wang, Zhenhua
    Jiang, Taizhi
    Xie, Liqiang
    Sui, Chao
    Ren, Rongzheng
    Qiao, Jinshuo
    Sun, Kening
    CERAMICS INTERNATIONAL, 2017, 43 (16) : 14037 - 14043
  • [34] Processing of nanocrystalline 8 mol% yttria-stabilized zirconia by conventional, microwave-assisted and two-step sintering
    Mazaheri, Mehdi
    Zahedi, A. M.
    Hejazi, M. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 492 (1-2): : 261 - 267
  • [35] Temperature gradient and microstructure evolution in AC flash sintering of 3 mol% yttria-stabilized zirconia
    Qin, Wei
    Yun, Jondo
    Thron, Andrew M.
    van Benthem, Klaus
    MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (05) : 549 - 556
  • [36] Grain growth kinetics of 3 mol. % yttria-stabilized zirconia during flash sintering
    Ren, Ke
    Xia, Junbo
    Wang, Yiguang
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2019, 39 (04) : 1366 - 1373
  • [37] Densification of porous 8 mol% yttria-stabilized zirconia component: modelling and experimental studies
    Lu, J.
    Song, X. C.
    Zhang, T. S.
    Hng, H. H.
    Ma, J.
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (03) : 575 - 581
  • [38] Structural and electrical properties of ZnO-doped 8 mol% yttria-stabilized zirconia
    Liu, Y
    Lao, LE
    SOLID STATE IONICS, 2006, 177 (1-2) : 159 - 163
  • [39] Texture development in 3 mol% yttria-stabilized tetragonal zirconia
    Suarez, Gustavo
    Sakka, Yoshio
    Suzuki, Tohru
    Uchikoshi, Tetsuo
    Aglietti, Esteban F.
    MATERIALS RESEARCH BULLETIN, 2009, 44 (08) : 1802 - 1805
  • [40] Densification of porous 8 mol% yttria-stabilized zirconia component: modelling and experimental studies
    J. Lu
    X. C. Song
    T. S. Zhang
    H. H. Hng
    J. Ma
    Journal of Materials Science, 2010, 45 : 575 - 581
12345