Investigation of the effect of U-shaped mini-channel structure on the thermal performance of liquid-cooled prismatic batteries

被引：14

作者：

Dong, Fei ^{[1
]}

Song, Decai ^{[1
]}

Ni, Jie ^{[1
]}

机构：

[1] Jiangsu Univ, Sch Automot & Traff Engn, Zhenjiang 212013, Jiangsu, Peoples R China

来源：

NUMERICAL HEAT TRANSFER PART A-APPLICATIONS | 2020年 / 77卷 / 01期

基金：

中国国家自然科学基金;

关键词：

LITHIUM-ION BATTERY; PHASE-CHANGE MATERIAL; MANAGEMENT-SYSTEM; OPTIMIZATION; MODULE; MODEL; PACK;

D O I：

10.1080/10407782.2019.1685812

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

In order to investigate the effects of three parameters of a mini-channel cold plate on the cooling performance of a U-shaped mini-channel structure, the effects of the channel length (L), width (W), and height (H) on the temperature of the cold plate is analyzed. The results demonstrate that increasing L and W of the channel can reduce the maximum temperature and standard deviation of the temperature of the cold plate to below 40 degrees C and 2.5 degrees C, respectively. Additionally, increasing H resulted in an adverse effect on the temperature performance. Analysis by RSM reveals that the change of the maximum temperature has a similar effect on the standard deviation of the temperature as the change of H and L. The length of the channel has the most significant effect on the maximum temperature and standard deviation of the temperature of the cold plate, with contribution rates of 79% and 78%, respectively.

引用

页码：105 / 120

页数：16

共 50 条

[21] Experimental investigations on the performance of mini-channel evaporator refrigeration system for thermal management of power batteries
Huang, Dezhu
Zhang, Hengyun
Wang, Xiaojun
Huang, Xinghua
Dai, Haifeng
INTERNATIONAL JOURNAL OF REFRIGERATION, 2021, 130 : 117 - 127
[22] An improved hybrid thermal management system for prismatic Li-ion batteries integrated with mini-channel and phase change materials
Mousavi, Sepehr
Zadehkabir, Amirhosein
Siavashi, Majid
Yang, Xiaohu
APPLIED ENERGY, 2023, 334
[23] Experimental investigation of the thermal performance of a heat sink with U-shaped heat pipes
Wang, Yaxiong
Wang, Jinrong
He, Xiufen
Duan, Jianguo
APPLIED THERMAL ENGINEERING, 2021, 186
[24] Investigation of the thermal performance of phase change material/mini-channel coupled battery thermal management system
Rao, Zhonghao
Wang, Qingchao
Huang, Congliang
APPLIED ENERGY, 2016, 164 : 659 - 669
[25] Thermal performance evaluation of the rotating U-shaped micro/mini/macrochannels using water and nanofluids
Kanikzadeh, M.
Sohankar, A.
NUMERICAL HEAT TRANSFER PART A-APPLICATIONS, 2016, 70 (06) : 650 - 672
[26] Numerical Investigation on the Thermal Management Performance of a Liquid-Cooled Cold Plate with Different Working Fluids
Zhao, Liang
Lv, Qian
PROCEEDINGS OF THE SEVENTH ASIA INTERNATIONAL SYMPOSIUM ON MECHATRONICS, VOL II, 2020, 589 : 413 - 423
[27] Effects of flow inlet angle on flow maldistribution and thermal performance of water cooled mini-channel heat sink
Kumar, Sanjeev
Singh, Pawan Kumar
INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2019, 138 : 504 - 511
[28] Heat Transfer Improvement of Prismatic Lithium-Ion Batteries via a Mini-Channel Liquid-Cooling Plate With Vortex Generators
Xu, Huanwei
Xiong, Shizhe
Li, Wei
Wu, Lingfeng
Wang, Zhonglai
JOURNAL OF ELECTROCHEMICAL ENERGY CONVERSION AND STORAGE, 2024, 21 (03)
[29] Investigation on Battery Thermal Management Based on Enhanced Heat Transfer Disturbance Structure within Mini-Channel Liquid Cooling Plate
Li, Renzheng
Yang, Yi
Liang, Fengwei
Liu, Jichao
Chen, Xinbo
ELECTRONICS, 2023, 12 (04)
[30] Parametric investigation to optimize the thermal management of pouch type lithium-ion batteries with mini-channel cold plates
Monika, Kokkula
Chakraborty, Chanchal
Roy, Sounak
Dinda, Srikanta
Singh, Satyapaul A.
Datta, Santanu Prasad
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2021, 164

← 1 2 3 4 5 →