Oxidation behavior of Ni-3,6, 10 wt.% al alloys at 800°C

被引:10
|
作者
Hayashi, Shigenari [1 ]
Narita, Saori
Narita, Toshio
机构
[1] Hokkaido Univ, Grad Sch Engn, Div Mat Sci, Sapporo, Hokkaido 0608628, Japan
[2] NGK Spark Plug Co Ltd, Nagoya, Aichi, Japan
来源
OXIDATION OF METALS | 2006年 / 66卷 / 3-4期
关键词
Ni-low Al alloy; internal oxidation; extrusion of Ni matrix; NiO scale;
D O I
10.1007/s11085-006-9034-x
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
The oxidation behavior of Ni and Ni-3, 6, and 10Al alloys at 800 degrees C in an N-2-O-2 gas mixture was investigated. The mass gain of each alloy depended on both the oxidation periods and Al content. NiO scale was formed on all alloy substrates accompanied by internal oxides of Al2O3. Many cavities were formed at the NiO/substrate interface at shorter oxidation times, and these cavities were found to be filled by metallic Ni(Al) from the matrix in the internal-oxidation zone by the development of internal oxides. The filling of cavities by Ni(Al) was more significant on higher Al alloys, which had a higher density of internal Al2O3. Once metallic Ni(Al) formed along the entire NiO/substrate interface, the oxidation kinetics became the same as pure Ni. It was concluded that pure Ni filling the cavities at the interface provided a diffusion path of Ni from the substrate to the NiO scale, and that controlled the oxidation kinetics.
引用
收藏
页码:191 / 207
页数:17
相关论文
共 50 条
  • [31] The transition from internal to external oxidation of Ni - X wt.% Cr at 950°C
    Nicolas, A.
    Aublant, E.
    Feulvarch, E.
    Wolski, K.
    DIFFUSION IN MATERIALS - DIMAT 2011, 2012, 323-325 : 295 - +
  • [32] Effect of Al on Corrosion Behavior of Imitation-Gold Cu-Zn-Ni-Sn Alloys in 3.5 wt.% NaCl solution
    Xiangyu Yu
    Zhu Xiao
    Qian Yu
    Zhou Li
    Qian Lei
    Jie Dai
    JOM, 2021, 73 : 589 - 599
  • [33] Corrosion behavior of Mg-5Al-xZn alloys in 3.5 wt.% NaCl solution
    Nguyen Dang Nam
    Mathesh, Motilal
    Thang Van Le
    Ha Tran Nguyen
    JOURNAL OF ALLOYS AND COMPOUNDS, 2014, 616 : 662 - 668
  • [34] Effect of Al on Corrosion Behavior of Imitation-Gold Cu-Zn-Ni-Sn Alloys in 3.5 wt.% NaCl solution
    Yu, Xiangyu
    Xiao, Zhu
    Yu, Qian
    Li, Zhou
    Lei, Qian
    Dai, Jie
    JOM, 2021, 73 (02) : 589 - 599
  • [35] Creep behavior of Ni-12 wt.% Al anodes for molten carbonate fuel cells
    Kim, D
    Lee, I
    Lim, H
    Lee, D
    JOURNAL OF POWER SOURCES, 2002, 109 (02) : 347 - 355
  • [36] Thermal stability up to 800 A°C of a Ni-4 wt% Al nanocomposite
    Zheng, L.
    Peng, X.
    Wang, F.
    JOURNAL OF MATERIALS SCIENCE, 2012, 47 (22) : 7759 - 7763
  • [37] Improved oxidation resistance of 15 wt.% Cr ferritic stainless steels containing 0.08-2.45 wt.% Al at 1000°C in air
    Xu, Yulai
    Zhang, Xin
    Fan, Lijun
    Li, Jun
    Yu, Xiaojiang
    Xiao, Xueshan
    Jiang, Laizhu
    CORROSION SCIENCE, 2015, 100 : 311 - 321
  • [38] High-Temperature Oxidation of Ni–20 wt.% Cu from 700 to 1100°C
    Reidar Haugsrud
    Oxidation of Metals, 2001, 55 : 571 - 583
  • [39] The Corrosion Behavior of Ni3(Si,Nb) Alloys in Boiling 70 wt.% Sulfuric Acid
    Hsu, Jen-Hsien
    Larson, Christopher M.
    Newkirk, Joseph W.
    Brow, Richard K.
    Zhang, San-Hong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2016, 25 (02) : 510 - 517
  • [40] Oxidation of Fe-Ni Alloys in Air at 700°C, 800°C and 950°C
    Shi, Zhongning
    Shi, Dong
    Gao, Bingliang
    Xu, Junli
    Hu, Xianwei
    Wang, Zhaowen
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2012, 31 (01) : 89 - 96