Numerical studies on crack growth in a steel tubular T-joint

被引：7

作者：

Olowokere, DO ^{[1
]}

Nwosu, DI ^{[1
]}

机构：

[1] MEM UNIV NEWFOUNDLAND,FAC ENGN & APPL SCI,ST JOHNS,NF A1B 3X5,CANADA

来源：

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES | 1997年 / 39卷 / 07期

关键词：

finite element analysis; line spring element; stress intensity factor; crack propagation; tubular T-joints; axial; in-plane and out-of-plane load cases;

D O I：

10.1016/S0020-7403(96)00087-2

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The results of a numerical investigation on fatigue crack growth of an offshore tubular T-joint under the action of axial, in-plane and out-of-plane bending loads are presented in this paper. Extensive stress analysis has been carried out to determine the location of the hot spot stress along the brace-chord intersection for each load case. Semi-elliptical cracks with varying crack lengths and crack depths were introduced at the hot spot location by means of line spring elements for stress intensity factor evaluation. The line springs were properly constrained to prevent the problem of crack surface penetration. The stress intensity factors obtained are then used in a crack growth law for life estimation. (C) 1997 Elsevier Science Ltd. All rights reserved.

引用

页码：859 / 871

页数：13

共 50 条

[31] Residual static strength of cracked concrete-filled circular steel tubular (CFCST) T-joint
Cui, M. J.
Shao, Y. B.
STEEL AND COMPOSITE STRUCTURES, 2015, 18 (04): : 1045 - 1062
[32] Post-fire residual strength of steel tubular T-joint with concrete-filled chord
Gao, Fei
Zhu, Hongping
Liang, Hongjun
Tian, Yang
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2017, 139 : 327 - 338
[33] Friction stir welding of steel T-joint configurations
Steel, RJ
Nelson, TW
Sorensen, CD
Packer, SM
PROCEEDINGS OF THE FIFTEENTH (2005) INTERNATIONAL OFFSHORE AND POLAR ENGINEERING CONFERENCE, VOL 4, 2005, : 1 - 5
[34] Investigation of impact response of cast steel T-joint
Wei, De-Min
Zhou, Yan-Jun
Beijing Ligong Daxue Xuebao/Transaction of Beijing Institute of Technology, 2014, 34 : 123 - 127
[35] FINITE-ELEMENT ANALYSIS OF CRACKED AND UNCRACKED TUBULAR T-JOINT
BHUYAN, GS
AROCKIASAMY, M
MUNASWAMY, K
VOSIKOVSKY, O
CANADIAN JOURNAL OF CIVIL ENGINEERING, 1986, 13 (03) : 261 - 269
[36] Working life estimate of the tubular T-joint by application of the LEFM concept
Djokovic, Jelena
Nikolic, Ruzica
Hadzima, Branislav
Arsic, Dusan
Trsko, Libor
ECF22 - LOADING AND ENVIRONMENTAL EFFECTS ON STRUCTURAL INTEGRITY, 2018, 13 : 334 - 339
[37] BRITTLE-FRACTURE STRENGTH OF TUBULAR T-JOINT OF OFFSHORE STRUCTURES .1. EVALUATION OF BRITTLE-FRACTURE STRENGTH OF TUBULAR T-JOINT MODEL FOR OFFSHORE STRUCTURES
HAGIWARA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1215 - 1215
[38] Finite element study on the static strength of a cracked tubular T-joint
Saad, SB
Leen, SB
Hyde, TH
TUBULAR STRUCTURES IX, 2001, : 247 - 255
[39] BRITTLE FRACTURES STRENGTH OF TUBULAR T-JOINT OF OFFSHORE STRUCTURES .2. EVALUATION OF PLASTIC HOT-SPOT STRAIN AND BRITTLE-FRACTURE OF TUBULAR T-JOINT
HAGIWARA, Y
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (12): : 1216 - 1216
[40] Microstructure and Stress Distribution Analysis of T-Joint of Clam Steel
Qiang Zhu
Yucheng Lei
Yunlong Wang
Shenyong Liang
Yimin Ye
Changsheng Li
Journal of Fusion Energy, 2015, 34 : 540 - 544

← 1 2 3 4 5 →