Effect of sintering temperature on physical properties of sintered green glass ceramic composite (GCC)

被引：0
|
作者：
Shamsudin, Zurina [1 ,2 ]
Mesri, Masturah [1 ]
Hasan, Rafidah [3 ]
Mustafa, Zaleha [1 ,2 ]
Juoi, Jariah Mohamad [1 ,2 ]
机构：
[1] Univ Tekn Malaysia Melaka, Fak Kejuruteraan Pembuatan, Durian Tunggal 76100, Melaka, Malaysia
[2] Univ Tekn Malaysia Melaka, Ctr Smart Syst & Innovat Design, Durian Tunggal 76100, Melaka, Malaysia
[3] Univ Tekn Malaysia Melaka, Fak Kejumteraan Mekan, Durian Tunggal 76100, Melaka, Malaysia
来源：
PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2020 (MERD'20) | 2020年
关键词：
Soda lime silicate glass; spent bleach earth; eggshell;
D O I：
暂无
中图分类号：
TP39 [计算机的应用];
学科分类号：
081203 ; 0835 ;
摘要：
The influence of various sintering temperatures on the physical properties of sintered green glass composite was investigated. Samples prepared involved direct sintering process. This study is focused on physical properties of the sintered green GCC according to ASTM C373. Samples prepared for physical testing were square shape with dimension of 18 x 18 x 4 mm. The samples were pressed under 2.5 tons pressure and sintered at 750, 800, 850 and 900 degrees C. The results showed that higher sintering temperature reduced apparent porosity and water absorption, which leads to increase bulk density. This study may contribute to roof and/or tiles application.
引用
收藏
页码：89 / 91
页数：3
相关论文
共 50 条
  • [1] Effect of the spark plasma sintering temperature on the microstructure and mechanical properties of a ceramic/metallic glass reinforced hybrid composite
    Rezaei, M. R.
    Albooyeh, A.
    Chachei, R.
    Malahi, P.
    JOURNAL OF COMPOSITE MATERIALS, 2022, 56 (17) : 2779 - 2788
  • [2] The Effect of Sintering Temperature on the Physical Properties and Bending Strength of Zirconia Toughened Ceramic
    Hua, Zequan
    Zhang, Bin
    Chen, Jihua
    Sun, Lianjun
    Zhang, Ying
    MATERIALS FOR ENERGY CONVERSION AND STORAGE, 2012, 519 : 273 - +
  • [3] Effect of sintering temperature on dielectric properties of barium titanate glass-ceramic composites
    Zhou, Min
    Zhang, Qingmeng
    Tan, Feihu
    Chen, Junyou
    Sun, Zhuye
    OPTOELECTRONICS AND ADVANCED MATERIALS-RAPID COMMUNICATIONS, 2019, 13 (11-12): : 609 - 612
  • [4] Effect of sintering temperature and binder addition on the properties of cupola slag glass–ceramic tiles
    K. K. Thakur
    M. Muhamed Shafeeq
    A. Rahman
    D. P. Mondal
    International Journal of Environmental Science and Technology, 2022, 19 : 11387 - 11396
  • [5] The Effect of Sintering Temperature on Physical Properties of Sintered Inconel 718 for Potential Aerospace Industry Application
    Johari, Nurhaslina
    Ibrahim, Rosdi
    Ahmad, Mohamad Azmirruddin
    Ahmed, Muhammad Jabir Suleiman
    Abu Talib, Abdul Rahim
    ADVANCED MATERIALS CONFERENCE (AMC 2012), 2014, 879 : 139 - +
  • [6] Effect of sintering temperature on the mechanical properties and microstructures of pressureless-sintered B4C/SiC ceramic composite with carbon additive
    Zhu, Yu
    Luo, Dujun
    Li, Zongjia
    Wang, Yangwei
    Cheng, Huanwu
    Wang, Fuchi
    Chen, Tao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 820
  • [7] Effect of sintering temperature on mechanical and wear behaviour of a ceramic composite
    Capela, P.
    Carvalho, S. F.
    Guedes, A.
    Pereira, M.
    Carvalho, L.
    Correia, J.
    Soares, D.
    Gomes, J. R.
    TRIBOLOGY INTERNATIONAL, 2018, 120 : 502 - 509
  • [8] Effect of sintering temperature and binder addition on the properties of cupola slag glass-ceramic tiles
    Thakur, K. K.
    Shafeeq, M. Muhamed
    Rahman, A.
    Mondal, D. P.
    INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2022, 19 (11) : 11387 - 11396
  • [9] ANALYSIS OF SINTERING OF A COMPOSITE WITH A GLASS OR CERAMIC MATRIX
    BORDIA, RK
    RAJ, R
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1986, 69 (03) : C55 - C57
  • [10] Effect of polyvinyl butyral on the glass/ceramic tape and sintering properties
    College of Materials Science and Engineering, Nanjing University of Technology, Nanjing 210009, China
    Zhou, H.-Q. (hqzhou@njut.edu.cn), 1600, Journal of Functional Materials (45):
12345