Properties and Rapid Sintering of a Nanostructured Cr2Zr-1.5ZrO2 Composite by High Frequency Induction Heating

被引：0
|
作者：
Shon, In-Jin [1 ,2 ]
机构：
[1] Chonbuk Natl Univ, Div Adv Mat Engn, Engn Coll, Jeonju 561756, South Korea
[2] Chonbuk Natl Univ, Res Ctr Adv Mat Dev, Engn Coll, Jeonju 561756, South Korea
来源：
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2017年 / 17卷 / 06期
基金：
新加坡国家研究基金会;
关键词：
Sintering; Composite; Nanostructure; Mechanical Properties; Synthesis; MECHANICAL-PROPERTIES; CONSOLIDATION; FABRICATION; CERAMICS;
D O I：
10.1166/jnn.2017.13419
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Dense nanostructured Cr2Zr-1.5ZrO(2) composite was sintered by high frequency induction heating within one min from mechanically milled powders. The advantage of this process is that it allows very quick densification to near-theoretical density and prohibition of grain growth in nanostructured materials. Highly dense Cr2Zr-1.5ZrO(2) composite with a relative density of up to 99.6% was produced under application of an 80 MPa pressure with the induced current. The mechanical properties and microstructure of the nanostructured Cr2Zr-1.5ZrO(2) was investigated from the viewpoints of using Vickers hardness measurement, X-ray diffraction analysis and FE-SEM observation.
引用
收藏
页码：4103 / 4107
页数：5
相关论文
共 50 条
  • [41] Mechanical properties and rapid consolidation of nanostructured WC and WC-Al2O3 composites by high-frequency induction-heated sintering
    Oh, Seung-Jin
    Kim, Byung-Su
    Shon, In-Jin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2016, 58 : 189 - 195
  • [42] High Frequency Induction Heated Synthesis and Consolidation of Nanostructured TaSi2-WSi2 Composite
    Shon, In-Jin
    Kang, Hyun-Su
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2015, 15 (07) : 5471 - 5474
  • [43] Synthesis and Rapid Consolidation of W-1.5 ZrO2 Composite
    Kim, Seong-Eun
    Shon, In-Jin
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2018, 28 (11): : 653 - 658
  • [44] Rapid synthesis and consolidation of nanostructured Mg2SiO4-MgSiO3 composites by high frequency induction heated sintering
    Shon, In-Jin
    Ko, In-Yong
    Jun, Hui-Soo
    Hong, Kyung-Tae
    Doh, Jung-Mann
    Yoon, Jin-Kook
    RESEARCH ON CHEMICAL INTERMEDIATES, 2011, 37 (08) : 821 - 830
  • [45] Properties and Rapid Consolidation of Nanostructured TiC and TiC-TiAl Hard Materials by High-Frequency Induction Heating
    Shon, In-Jin
    Kwon, Hanjung
    Jo, Hyoung-Gon
    MATERIALS TRANSACTIONS, 2014, 55 (08) : 1363 - 1366
  • [46] Mechanical synthesis and rapid consolidation of nanocrystalline 3Fe0.67Cr0.33-Al2O3 composite by high frequency induction heating
    In-Jin Shon
    Sung-Yong Kim
    In-Yong Ko
    Jung-Mann Doh
    Jin-Kook Yoon
    Na-Ra Park
    Metals and Materials International, 2011, 17 : 445 - 449
  • [47] Mechanical synthesis and rapid consolidation of nanocrystalline 3Fe0.67Cr0.33-Al2O3 composite by high frequency induction heating
    Shon, In-Jin
    Kim, Sung-Yong
    Ko, In-Yong
    Doh, Jung-Mann
    Yoon, Jin-Kook
    Park, Na-Ra
    METALS AND MATERIALS INTERNATIONAL, 2011, 17 (03) : 445 - 449
  • [48] High Temperature Steam Oxidation Behavior of Zr-2 Alloy with ZrO2/Cr Composite Coating
    Wang, Xingping
    Xue, Wenbin
    Wang, Wenxuan
    Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research, 2023, 37 (10): : 759 - 769
  • [49] Mechanochemical Synthesis and Rapid Consolidation of Nanostructured Nb-ZrO2 Composite
    Kim, Seong-Eun
    Yoon, Jin-Kook
    Shon, In-Jin
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2020, 20 (07) : 4253 - 4256
  • [50] Rapid consolidation of a nanostructured Mo-reinforced ZrO2 composite
    Shon, In-Jin
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2018, 72 : 257 - 262
12345