Properties and Rapid Sintering of a Nanostructured Cr2Zr-1.5ZrO2 Composite by High Frequency Induction Heating

被引：0
|
作者：
Shon, In-Jin [1 ,2 ]
机构：
[1] Chonbuk Natl Univ, Div Adv Mat Engn, Engn Coll, Jeonju 561756, South Korea
[2] Chonbuk Natl Univ, Res Ctr Adv Mat Dev, Engn Coll, Jeonju 561756, South Korea
来源：
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2017年 / 17卷 / 06期
基金：
新加坡国家研究基金会;
关键词：
Sintering; Composite; Nanostructure; Mechanical Properties; Synthesis; MECHANICAL-PROPERTIES; CONSOLIDATION; FABRICATION; CERAMICS;
D O I：
10.1166/jnn.2017.13419
中图分类号：
O6 [化学];
学科分类号：
0703 ;
摘要：
Dense nanostructured Cr2Zr-1.5ZrO(2) composite was sintered by high frequency induction heating within one min from mechanically milled powders. The advantage of this process is that it allows very quick densification to near-theoretical density and prohibition of grain growth in nanostructured materials. Highly dense Cr2Zr-1.5ZrO(2) composite with a relative density of up to 99.6% was produced under application of an 80 MPa pressure with the induced current. The mechanical properties and microstructure of the nanostructured Cr2Zr-1.5ZrO(2) was investigated from the viewpoints of using Vickers hardness measurement, X-ray diffraction analysis and FE-SEM observation.
引用
收藏
页码：4103 / 4107
页数：5
相关论文
共 50 条
  • [21] Rapid sintering of nanocrystalline 8 mol.%Y2O3-stabilized ZrO2 by high-frequency induction heating method
    Hwan -Cheol Kim
    In -Jin Shon
    In -Kyoon Jeong
    In -Yong Ko
    Metals and Materials International, 2006, 12 : 393 - 398
  • [22] Rapid sintering of nanocrystalline 8 mol.%Y2O3-stabilized ZrO2 by high-frequency induction heating method
    Kim, Hwan-Cheol
    Shon, In-Jin
    Jeong, In-Kyoon
    Ko, In-Yong
    METALS AND MATERIALS INTERNATIONAL, 2006, 12 (05) : 393 - 398
  • [23] Rapid Sintering and Synthesis of TiAl by High-Frequency Induction Heating and its Mechanical properties
    Kim, Na-Ri
    Na, Kwon-Il
    Kim, Wonbaek
    Cho, Sung-Wook
    Shon, In-Jin
    KOREAN JOURNAL OF METALS AND MATERIALS, 2010, 48 (11): : 989 - 994
  • [24] Simultaneous Synthesis and Consolidation of Nanostructured MoSi2-NbSi2 Composite by High-Frequency Induction Heated Sintering and Its Mechanical Properties
    Kang, Hyun-Su
    Shon, In-Jin
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2014, 24 (04): : 180 - 185
  • [25] Mechanochemical synthesis and rapid consolidation of nanostructured 2Co-ZrO2 composite by pulsed current activated heating
    Kwak, Bong-Won
    Kim, Byung-Su
    Shon, In-Jin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2015, 16 (05): : 451 - 456
  • [26] Properties and Rapid Consolidation of Nanostructured Fe3Al Compound by High Frequency Induction Heating
    Shon, In-Jin
    Kim, Tae-Wan
    Doh, Jung-Mann
    Yoon, Jin-Kook
    Na, Kwon-Il
    Ko, In-Yong
    MULTI-FUNCTIONAL MATERIALS AND STRUCTURES III, PTS 1 AND 2, 2010, 123-125 : 759 - +
  • [27] Rapid synthesis and consolidation of nanostructured (Mo,W)Si2 by high-frequency induction heated sintering and its mechanical properties
    Kang, Hyun-Su
    Lee, Seok-Jae
    Shon, In-Jin
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2014, 15 (05): : 286 - 289
  • [28] Rapid consolidation of nanostructured TaSi2 from mechanochemically synthesized powder by high frequency induction heated sintering
    Shon, In-Jin
    Ko, In-Yong
    Chae, Seung-Myoung
    Na, Kwon-il
    CERAMICS INTERNATIONAL, 2011, 37 (02) : 679 - 682
  • [29] Rapid Sintering of Nanostuctured Tungsten Carbide by High-Frequency Induction Heating and its Mechanical Properties
    Kang, Hyun-Su
    Doh, Jung-Mann
    Hong, Kyung-Tae
    Ko, In-Yong
    Shon, In-Jin
    KOREAN JOURNAL OF METALS AND MATERIALS, 2010, 48 (11): : 1009 - 1013
  • [30] High frequency induction heated sintering of nanostructured Al2O3-ZrB2 composite produced by MASHS technique
    Abbasi, B. Jamal
    Zakeri, M.
    Tayebifard, S. A.
    CERAMICS INTERNATIONAL, 2014, 40 (07) : 9217 - 9224
12345