Effect of Cutting Parameters on Surface Roughness in Turning of Bone

被引：4
|
作者：
Ndaruhadi, P. Y. M. W. [1 ]
Sharif, S. [1 ]
Noordin, M. Y. [1 ]
Kurniawan, D. [1 ]
机构：
[1] Univ Jenderal Achmad Yani, Dept Mech Engn, Cimahi, Indonesia
来源：
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1 | 2014年 / 845卷
关键词：
Bone Machining; Surface Roughness; Cutting Conditions; Turning; DRILLING PARAMETERS; TEMPERATURE;
D O I：
10.4028/www.scientific.net/AMR.845.708
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Surface roughness indicates the damage of the bone tissue due to bone machining process. Aiming at inducing the least damage, this study evaluates the effect of some cutting conditions to the surface roughness of machined bone. In the turning operation performed, the variables are cutting speed (26 and 45 m/min), feed (0.05 and 0.09 mm/rev), tool type (coated and uncoated), and cutting direction (longitudinal and transversal). It was found that feed did not significantly influence surface roughness. Among the influencing factor, the rank is tool type, cutting speed, and cutting direction.
引用
收藏
页码：708 / 712
页数：5
相关论文
共 50 条
  • [1] Effect of cutting parameters on surface roughness in turning of annealed AISI-1020 steel
    Zurita, Omar
    Di-Graci, Veronica
    Capace, Maria
    [J]. REVISTA FACULTAD DE INGENIERIA, UNIVERSIDAD PEDAGOGICA Y TECNOLOGICA DE COLOMBIA, 2018, 27 (47): : 111 - 118
  • [2] Effect of cutting parameters on surface roughness in turning of CPM 10V steel
    Aleksic, Andelko
    Rodic, Dragan
    Sekulic, Milenko
    Gostimirovic, Marin
    Savkovic, Borislav
    [J]. 2022 21ST INTERNATIONAL SYMPOSIUM INFOTEH-JAHORINA (INFOTEH), 2022,
  • [3] Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method
    Asilturk, Ilhan
    Akkus, Harun
    [J]. MEASUREMENT, 2011, 44 (09) : 1697 - 1704
  • [4] OPTIMISING THE EFFECT OF CUTTING PARAMETERS ON THE AVERAGE SURFACE ROUGHNESS IN A TURNING PROCESS WITH THE TAGUCHI METHOD
    Akkus, Harun
    [J]. MATERIALI IN TEHNOLOGIJE, 2018, 52 (06): : 781 - 785
  • [5] Effect of Cutting Parameters on Surface Roughness and Cutting Forces in Hard Turning of 1.2367 Hot Work Tool Steel
    Erdem, Sumeyye
    Ozdemir, Mustafa
    Rafighi, Mohammad
    Yavuz, Mehtap
    [J]. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2023, 26 (03): : 1071 - 1077
  • [6] Examination and modelling of the influence of cutting parameters on the cutting force and the surface roughness in longitudinal turning
    Bajic, Drazen
    Lela, Branimir
    Cukor, Goran
    [J]. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2008, 54 (05): : 322 - 333
  • [7] Application of Taguchi method in the optimization of cutting parameters for surface roughness in turning
    Nalbant, M.
    Gokkaya, H.
    Sur, G.
    [J]. MATERIALS & DESIGN, 2007, 28 (04) : 1379 - 1385
  • [8] THE INFLUENCE OF THE CUTTING PARAMETERS ON THE SURFACE ROUGHNESS AND VIBRATION SIGNAL IN THE TURNING PROCESS
    Marinkovic, D.
    Antic, A.
    Knezev, M.
    Mladjenovic, C.
    Zivkovic, A.
    [J]. MM SCIENCE JOURNAL, 2024, 2024 : 7539 - 7544
  • [9] Influence of Cutting Parameters on Surface Roughness for Wet and Dry Turning Process
    Yusuf, Muhammad
    Anuar, Khairol
    Ismail, Napsiah
    Sulaiman, Shamsuddin
    [J]. COMPOSITE SCIENCE AND TECHNOLOGY, PTS 1 AND 2, 2011, 471-472 : 233 - 238
  • [10] Optimization of cutting parameters regarding surface roughness during longitudinal turning
    Bilic, B.
    Bajic, D.
    Veza, I.
    [J]. Annals of DAAAM for 2004 & Proceedings of the 15th International DAAAM Symposium: INTELLIGNET MANUFACTURING & AUTOMATION: GLOBALISATION - TECHNOLOGY - MEN - NATURE, 2004, : 39 - 40
12345