Effect of Cutting Parameters on Surface Roughness in Turning of Bone

被引：4
|
作者：
Ndaruhadi, P. Y. M. W. [1 ]
Sharif, S. [1 ]
Noordin, M. Y. [1 ]
Kurniawan, D. [1 ]
机构：
[1] Univ Jenderal Achmad Yani, Dept Mech Engn, Cimahi, Indonesia
来源：
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1 | 2014年 / 845卷
关键词：
Bone Machining; Surface Roughness; Cutting Conditions; Turning; DRILLING PARAMETERS; TEMPERATURE;
D O I：
10.4028/www.scientific.net/AMR.845.708
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Surface roughness indicates the damage of the bone tissue due to bone machining process. Aiming at inducing the least damage, this study evaluates the effect of some cutting conditions to the surface roughness of machined bone. In the turning operation performed, the variables are cutting speed (26 and 45 m/min), feed (0.05 and 0.09 mm/rev), tool type (coated and uncoated), and cutting direction (longitudinal and transversal). It was found that feed did not significantly influence surface roughness. Among the influencing factor, the rank is tool type, cutting speed, and cutting direction.
引用
收藏
页码：708 / 712
页数：5
相关论文
共 50 条
  • [21] Modeling the surface roughness and cutting force for turning
    Lin, WS
    Lee, BY
    Wu, CL
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 108 (03) : 286 - 293
  • [22] Investigation of the effect of cutting parameters on cutting force, surface roughness and chip shape in turning of Sleipner cold work tool steel
    Ozlu, Baris
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2021, 36 (03): : 1242 - 1251
  • [23] Effect of cutting parameters on cutting force and surface roughness during finish hard turning AISI52100 grade steel
    Bartarya, Gaurav
    Choudhury, S. K.
    FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 651 - 656
  • [24] Optimization of Cutting Parameters on Turning Process Based on Surface Roughness using Response Surface Methodology
    Yusuf, Muhammad
    Ariffin, M. K. A.
    Ismail, N.
    Sulaiman, S.
    MATERIALS AND COMPUTATIONAL MECHANICS, PTS 1-3, 2012, 117-119 : 1561 - 1565
  • [25] Optimization of Cutting Parameters for Minimization of Cutting Temperature and Surface Roughness in Turning of Al6061 Alloy
    Rajesh, N.
    Yohan, M.
    Venkataramaiah, P.
    Pallavi, M. Vani
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 8624 - 8632
  • [26] Investigation of Cutting Parameters Effect for Minimization of Sur face Roughness in Internal Turning
    Munawar, Muhammad
    Chen, Joseph Ching-Shihn
    Mufti, Nadeem Ahmad
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2011, 12 (01) : 121 - 127
  • [27] Investigation of cutting parameters effect for minimization of sur face roughness in internal turning
    Muhammad Munawar
    Joseph Ching-Shihn Chen
    Nadeem Ahmad Mufti
    International Journal of Precision Engineering and Manufacturing, 2011, 12 : 121 - 127
  • [28] Effect of cutting parameters on surface roughness tool temperature and vibration in turning of AISI 316 Ti stainless steel
    Ay, Mustafa
    MATERIALS TESTING, 2019, 61 (01) : 71 - 79
  • [29] STUDY OF THE CUTTING PARAMETERS ON SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN HARD TURNING OF UHMWPE
    Aguilera-Ojeda, Cesar Oswaldo
    Saldana-Robles, Alberto
    Vidal-Lesso, Agustin
    Martinez-Ramirez, Israel
    Aguilera-Gomez, Eduardo
    PROCEEDINGS OF THE ASME 2020 INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, IMECE2020, VOL 2A, 2020,
  • [30] Optimization with Taguchi Method of Influences on Surface Roughness of Cutting Parameters in CNC Turning Processing
    Ozdemir, Mustafa
    MECHANIKA, 2019, 25 (05): : 397 - 405
12345