A method for achieving monotonic frequency-temperature response for langasite surface-acoustic-wave high-temperature sensor

To achieve the monotonic frequency-temperature response for a high-temperature langasite (LGS) surface-acoustic-wave (SAW) sensor in a wide temperature range, a method utilizing two substrate cuts with different propagation angles on the same substrate plane was proposed. In this method, the theory of effective permittivity is adopted to calculate the temperature coefficients of frequency (TCF), electromechanical coupling coefficients (k(2)), and power flow angle (PFA) for different propagation angles on the same substrate plane, and then the two substrate cuts were chosen to have large k(2) and small PFA, as well as the difference in their TCFs (Delta TCF) to always have the same sign of their values. The Z-cut LGS substrate plane was taken as an example, and the two suitable substrate cuts with propagation angles of 74 and 80 degrees were chosen to derive a monotonic frequency-temperature response for LGS SAW sensors at -50 to 540 degrees C. Experiments on a LGS SAW sensor using the above two substrate cuts were designed, and its measured frequency-temperature response at -50 to 540 degrees C agreed well with the theory, demonstrating the high accuracy of the proposed method. (C) 2016 The Japan Society of Applied Physics