Development of Nb3Al superconducting wire for accelerator magnets

被引：14
|
作者：
Kobayashi, T [1 ]
Tsuchiya, K
Shintomi, T
Terashima, A
Banno, N
Nimori, S
Takeuchi, T
Tagawa, K
Iwaki, G
机构：
[1] KEK, High Energy Accelerator Res Org, Tsukuba, Ibaraki 3050801, Japan
[2] Natl Inst Mat Sci, Tsukuba, Ibaraki 3050003, Japan
[3] Hitachi Cable Ltd, Tsuchiura, Ibaraki 3000026, Japan
来源：
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY | 2004年 / 14卷 / 02期
关键词：
accelerator magnets; critical current density; Nb3Al wire; rapid-heating/quenching process;
D O I：
10.1109/TASC.2004.830370
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Nb3Al superconductors have shown promising performance compared to Nb3Sn conductors when processed by rapid heating/quenching process. Therefore we have started an R&D program of Nb3Al conductors for future accelerator magnets. Several test wires of around 0.8 mm diameter, which have relatively small filament (similar to50 micron diameter) and low matrix ratio (similar to1.0), were fabricated, and the heat treatment and area reduction conditions after the rapid quenching process were studied. The highest noncopper J(c) achieved during this study was 1734 A/mm(2) at 10 T and 4.2
引用
收藏
页码：1016 / 1019
页数：4
相关论文
共 50 条
  • [21] Fatigue behavior at room temperature and its influence on superconducting properties of Nb3Al composite wire
    Sawada, T
    Ochiai, S
    Hojo, M
    Yamada, Y
    Takahashi, K
    Ayai, N
    Watanabe, K
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1997, 61 (09) : 822 - 828
  • [22] Fatigue behavior at room temperature and its influence on superconducting properties of Nb3Al composite wire
    Sawada, Takehiro
    Ochiai, Shojiro
    Hojo, Masaki
    Yamada, Yuichi
    Takahashi, Kenichi
    Ayai, Naoki
    Watanabe, Kazuo
    Nippon Kinzoku Gakkaishi/Journal of the Japan Institute of Metals, 1997, 61 (09): : 822 - 828
  • [23] Magnetization measurement for a nearly stoichiometric Nb3Al wire
    Mao, D
    Itoh, K
    Kuroda, T
    Yuyama, M
    Wada, H
    Murakami, Y
    PHYSICA C, 1998, 301 (3-4): : 272 - 276
  • [24] Status and perspective of the Nb3Al development
    Takeuchi, T.
    Kikuchi, A.
    Banno, N.
    Kitaguchi, H.
    Iijima, Y.
    Tagawa, K.
    Nakagawa, K.
    Tsuchiya, K.
    Mitsuda, C.
    Koizumi, N.
    Okuno, K.
    CRYOGENICS, 2008, 48 (7-8) : 371 - 380
  • [25] DEVELOPMENT OF NB3AL MULTIFILAMENTARY SUPERCONDUCTORS
    AYAI, N
    YAMADA, Y
    MIKUMO, A
    TAKAHASHI, K
    SATO, K
    KOIZUMI, N
    SUGIMOTO, M
    ANDO, T
    TAKAHASHI, Y
    NISHI, M
    TSUJI, H
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 1995, 5 (02) : 893 - 896
  • [26] PARAMETERS AFFECTING CRITICAL CURRENTS IN SUPERCONDUCTING NB3AL
    MARTIN, PJ
    CAMPBELL, AM
    EVETTS, JE
    JOURNAL OF MATERIALS SCIENCE, 1975, 10 (03) : 498 - 504
  • [27] MICROSTRUCTURAL CHARACTERIZATION OF NB3AL ULTRAFINE MULTIFILAMENTARY SUPERCONDUCTING WIRE BY ANALYTICAL ELECTRON-MICROSCOPY
    WADAYAMA, Y
    SUZUKI, T
    AIHARA, K
    TADA, N
    KAMATA, K
    SAKAI, S
    INOUE, K
    APPLIED PHYSICS LETTERS, 1991, 59 (04) : 473 - 475
  • [28] Strain Dependence of Critical Current for Nb3Al Superconducting Wire Fabricated by Restacked RHQT Process
    Nishijima, Gen
    Banno, Nobuya
    Kitaguchi, Hitoshi
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
  • [29] Nb3Al development for HEP applications
    Sumption, MD
    Wu, X
    Buta, F
    Tomsic, M
    Phillips, J
    McFadden, K
    Collings, EW
    ADVANCES IN CRYOGENIC ENGINEERING, VOLS 50A AND B, 2004, 711 : 485 - 491
  • [30] EFFECT OF THE LAYER THICKNESS ON NB3AL SUPERCONDUCTING WIRES
    SAITO, S
    HANADA, S
    IKEDA, K
    NAGATA, A
    NOTO, K
    MATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, 1990, 7 (1-2): : 31 - 36
12345