Fabrication of micro/nanocomposite of alumina/zirconia system

被引：0
|
作者：
Nagashima, M [1 ]
Maki, K [1 ]
Hayakawa, M [1 ]
机构：
[1] Tottori Univ, Dept Mech Engn, Tottori 6808552, Japan
来源：
PRICM 4: FORTH PACIFIC RIM INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, VOLS I AND II | 2001年
关键词：
alumina/zirconia system; nano-composite; high energy ball milling; mechanical property;
D O I：
暂无
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
An Al2O3-5vol%ZrO2 micro/nano-composite was successfully fabricated by using the HE ball mill mixing. The role of HE ball milling was to reduce the crystallite size of Al2O3, powder into half of the as received powder, as well as introducing some strain in the particles. Thus, the refinement of Al2O3 powder seem to be effective to embed ZrO2 particles in the Al2O3 grains by the enhanced grain growth of the Al2O3, matrix. The mixed powders could be sintered to a nearly full density at 1400degreesC in the ambient atmosphere. The matrix grain size of the composite was under 0.6mum. The flexural strength of the composites was 1.3 times higher than that of monolithic Al2O3.
引用
收藏
页码：2061 / 2064
页数：4
相关论文
共 50 条
  • [41] Effect of sandblasting and heat treatment on biaxial flexure strength of the zirconia/alumina nanocomposite
    Ban, S.
    Sato, H.
    Suehiro, Y.
    Nakanishi, H.
    Nawa, M.
    BIOCERAMICS, VOL 19, PTS 1 AND 2, 2007, 330-332 : 353 - +
  • [42] Preparation and characterization of mesoporous ceria–zirconia–alumina nanocomposite with high hydrothermal stability
    Md. Hasan Zahir
    Yumi H. Ikuhara
    Shinji Fujisaki
    Koji Sato
    Takayuki Nagano
    Yuji Iwamoto
    Journal of Materials Research, 2007, 22 : 3201 - 3209
  • [43] Alumina to zirconia
    Mussler, BH
    Gutmann, B
    Chalup, A
    Plunkert, PA
    Cunningham, LD
    Rudolph, S
    Alt, C
    Bunt, N
    Parr, C
    Virta, RL
    Potter, MJ
    Kramer, DA
    Holroyd, B
    Karr, C
    Rieger, KC
    Hedrick, JB
    Bolen, WP
    Burns, L
    Lathrop, D
    Johnson, RL
    Perl, AS
    Russo, FP
    Partis, DA
    AMERICAN CERAMIC SOCIETY BULLETIN, 2001, 80 (08): : 49 - +
  • [44] Creep behaviour of alumina, zirconia and zirconia-toughened alumina
    Chevalier, J
    Olagnon, C
    Fantozzi, G
    Gros, H
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1997, 17 (06) : 859 - 864
  • [45] Creep behaviour of alumina, zirconia and zirconia-toughened alumina
    G.E.M.P.P.M., UMR C.N.R.S. 5510, I.N.S.A. Bât. 502, 69621 Villeurbanne, France
    J. Eur. Ceram. Soc., 6 (859-864):
  • [46] THE ALUMINA FIBER TETRAGONAL ZIRCONIA POLYCRYSTAL COMPOSITE SYSTEM
    PUJARI, VK
    JAWED, I
    COMPOSITES, 1986, 17 (02): : 137 - 140
  • [47] Phase diagram of the alumina-zirconia-samaria system
    Lakiza, Sergij
    Lopato, Lydia
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (11) : 3516 - 3521
  • [48] Sliding wear response of an alumina-zirconia system
    Esposito, L
    Moreno, R
    Herencia, AJS
    Tucci, A
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 1998, 18 (01) : 15 - 22
  • [49] Millimeter wave spectroscopy of alumina-zirconia system
    Sano, S
    Tsuzuki, A
    Oda, K
    Ueno, T
    Makino, Y
    Miyake, S
    ADVANCES IN MICROWAVE AND RADIO FREQUENCY PROCESSING, 2006, : 149 - +
  • [50] FABRICATION OF ZIRCONIA-ALUMINA FUNCTIONALLY GRADIENT MATERIAL BY SUPERPLASTIC DIFFUSION BONDING
    NAGANO, T
    WAKAI, F
    JOURNAL OF MATERIALS SCIENCE, 1993, 28 (21) : 5793 - 5799
12345