Lessons learnt from ITER safety & licensing for DEMO and future nuclear fusion facilities

One of the strong motivations for pursuing the development of fusion energy is its potentially low environmental impact and very good safety performance. But this safety and environmental potential can only be fully realized by careful design choices. For DEMO and other fusion facilities that will require nuclear licensing, S&E objectives and criteria should be set at an early stage and taken into account when choosing basic design options and throughout the design process. Studies in recent decades of the safety of fusion power plant concepts give a useful basis on which to build the S&E approach and to assess the impact of design choices. The experience of licensing ITER is of particular value, even though there are some important differences between ITER and DEMO. The ITER project has developed a safety case, produced a preliminary safety report and had it examined by the French nuclear safety authorities, leading to the licence to construct the facility. The key technical issues that arose during this process are recalled, particularly those that may also have an impact on DEMO safety. These include issues related to postulated accident scenarios, environmental releases during operation, occupational radiation exposure, and radioactive waste. (C) 2014 EURATOM/Culham Centre for Fusion Energy. Published by Elsevier B.V. All rights reserved.