Effect of moisture content on the properties of silanized jute-epoxy composites

被引:106
|
作者
Gassan, J [1 ]
Bledzki, AK [1 ]
机构
[1] UNIV GESAMTHSCH KASSEL,INST WERKSTOFFTECH KUNSTSTOFF & RECYCLINGTECH,D-34109 KASSEL,GERMANY
关键词
D O I
10.1002/pc.10272
中图分类号
TB33 [复合材料];
学科分类号
摘要
The composites investigated in this article were epoxy resins reinforced with jute-fibers. The jute-fibers were modified with an epoxyfunctional-gamma-glycidoxypropyltrimethoxy-silane (A-187 from Osi-Specialtis GmbH, Germany), which works as a coupling agent between fiber and matrix. The introduction of the coupling agent distinctly influences the mechanical properties of the composite: Dynamic modulus was doubled, damping was reduced by about 50%, and the Wohler curves showed fatigue limits increased by about 20%. The investigations pointed out further that the moisture uptake of composites with silanized fibers was reduced by about 10-20%. Moisture at equilibrium and kinetics of absorption increase with increasing fiber content. Finally, the application of the coupling agent caused a reduction of moisture effects on mechanical properties. Tensile strength, tensile modulus, and fatigue strength under repeated tensile stress were reduced up to 30%. This tendency was not duplicated in the results for flexural strength and flexural modulus.
引用
收藏
页码:179 / 184
页数:6
相关论文
共 50 条
  • [31] Mechanical Properties of Woven Mat Jute/Epoxy Composites
    Ferreira, Jose Martins
    Capela, Carlos
    Manaia, Joao
    Costa, Jose Domingos
    [J]. MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2016, 19 (03): : 702 - 710
  • [32] Adhesion strength and mechanical properties of nanoclay modified hybrid kevlar/jute-epoxy fiber metal laminate
    Naveen, Michael Roger
    Kamaraj, Logesh
    Ponnarengan, Hariharasakthisudhan
    [J]. POLYMER COMPOSITES, 2024, 45 (11) : 9936 - 9947
  • [33] Effect of surface modification of jute fiber on the mechanical properties and durability of jute fiber-reinforced epoxy composites
    Dilfi, Anna K. F.
    Balan, Aiswarya
    Bin, Hong
    Xian, Guijun
    Thomas, Sabu
    [J]. POLYMER COMPOSITES, 2018, 39 : E2519 - E2528
  • [34] Moisture effect on degradation of jute/glass hybrid composites
    Aquino, E. M. F.
    Sarmento, L. P. S.
    Oliveira, W.
    Silva, R. V.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2007, 26 (02) : 219 - 233
  • [35] Moisture Absorption Behavior and Its Effect on the Mechanical Properties of Jute-Reinforced Epoxy Composite
    Raghavendra, Gujjala
    Kumar, Kankanala Anil
    Kumar, Merum Harsha
    RaghuKumar, Bhukya
    Ojha, Shakuntala
    [J]. POLYMER COMPOSITES, 2017, 38 (03) : 516 - 522
  • [36] Effect of ceramic fillers on mechanical properties of woven jute fabric reinforced epoxy composites
    Ahmed, K. Sabeel
    Mallinatha, V.
    Amith, S. J.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (15) : 1315 - 1326
  • [37] Effect of Moisture Absorption on the Flexural Properties of Basalt/CNT/Epoxy Composites
    Kim, Man-Tae
    Rhee, Kyong-Yop
    Kim, Hyeon-Ju
    Jung, Dong-Ho
    [J]. CARBON LETTERS, 2012, 13 (03) : 187 - 189
  • [38] Structural analysis and mechanical properties of lignite fly-ash-added jute-epoxy polymer matrix composite
    Sathishkumar, G. K.
    Rajkumar, G.
    Srinivasan, K.
    Umapathy, M. J.
    [J]. JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2018, 37 (02) : 90 - 104
  • [39] Filled and unfilled glass/jute-epoxy methacrylate of 1,1′-bis(4-hydroxy phenyl)cyclohexane composites: Mechanical and electrical properties
    Patel, Jignesh V.
    Patel, Jignesh P.
    Bhatt, Ritesh D.
    Parsania, Parsotam H.
    [J]. INDIAN JOURNAL OF CHEMICAL TECHNOLOGY, 2016, 23 (02) : 153 - 157
  • [40] EFFECT OF MOISTURE SORPTION ON AC PROPERTIES OF GLASS-EPOXY COMPOSITES
    DOUKKALI, K
    SEGUI, Y
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 1990, 41 (7-8) : 1533 - 1547