Filled and unfilled glass/jute-epoxy methacrylate of 1,1′-bis(4-hydroxy phenyl)cyclohexane composites: Mechanical and electrical properties

被引：0

作者：

Patel, Jignesh V. ^{[1
]}

Patel, Jignesh P. ^{[1
]}

Bhatt, Ritesh D. ^{[1
]}

Parsania, Parsotam H. ^{[1
]}

机构：

[1] Saurashtra Univ, Div Polymer Chem, Dept Chem, Rajkot 360005, Gujarat, India

来源：

INDIAN JOURNAL OF CHEMICAL TECHNOLOGY | 2016年 / 23卷 / 02期

关键词：

Composites; Electrical properties; Fillers; Mechanical properties; Vinyl ester; FRACTURE;

D O I：

暂无

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

Epoxy methacrylate of 1,1'-bis(4-hydroxyphenyl)cyclohexane has been synthesized and styrenated (EMAS) for the preparation of silica and calcium carbonate filled glass and jute composites. Both jute and glass composites displayed good tensile and flexural properties. Tensile strength is found to be improved, while flexural strength decreased due to rigid and brittle nature of the filled composites. Better improvement is observed for silica filled composites. Both tensile and flexural strengths of silica filled glass composites decreased with silica content in the composites. For calcium carbonate filled glass composites, tensile strength is found to increase with filler content up to 6% and then it is decreased with increasing filler content. For silica filled jute composites electric strength is found to increase with filler content. Calcium carbonate filled jute composites show electric strength to increase with filler content up to 6% and then it is found to decrease. For silica filled glass composites, electric strength is found to increase with filler content up to 4% and then it is decreased with filler content. For calcium carbonate filled glass composites, it is found to increase with filler content. Practically no effect of filler content is observed on volume resistivity of filled jute composites. Silica filler caused almost doubled improvement of volume resistivity. For calcium carbonate filled glass composites volume resistivity is found to increase with filler content. Comparatively calcium carbonate filled composites show better tensile and flexural properties than those of silica filled composites, while silica filled composites show somewhat better electrical properties than those of calcium carbonate filled composites. Composites may find their applications as low load bearing housing units in building and construction industries as well as in electrical and electronic industries as insulating materials.

引用

页码：153 / 157

页数：5

共 33 条

[1] Thermo-mechanical and electrical properties of polysulfonates of diphenyl methane -: 4,4′-disulfonyl chloride and 1,1′-bis(4-hydroxy phenyl) cyclohexane/1,1′-bis(3-methyl-4-hydroxy phenyl) cyclohexane
Karia, FD
Parsania, PH
[J]. JOURNAL OF POLYMER MATERIALS, 1999, 16 (02): : 161 - 165
[2] Preparation, Mechanical and Electrical Properties of Glass and Jute-Epoxy/Epoxy Polyurethane Composites
Adroja, Pooja P.
Koradiya, S. B.
Patel, J. P.
Parsania, P. H.
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2011, 50 (09) : 937 - 940
[3] Synthesis and characterization of cardo polysulfonates of 1,1-bis (4-hydroxy phenyl) cyclohexane/1,1-bis (3-methyl-4-hydroxy phenyl) cyclohexane
Karia, FD
Parsania, PH
[J]. EUROPEAN POLYMER JOURNAL, 1999, 35 (01) : 121 - 125
[4] Synthesis and characterization of cardo copolyester of 9,9′-bis(4-hydroxy phenyl) anthrone-10 and 1,1′-bis(R,4-hydroxy phenyl) cyclohexane with terephthaloyl chloride
Kavthia, SH
Manwar, BG
Parsania, PH
[J]. JOURNAL OF THE INDIAN CHEMICAL SOCIETY, 2005, 82 (07) : 620 - 624
[5] CURING OF EPOXY-RESIN OF 1,1'-BIS(4-HYDROXY PHENYL) CYCLOHEXANE WITH PHTHALIC-ANHYDRIDE - A DIFFERENTIAL SCANNING CALORIMETRIC INVESTIGATION
SHAH, PP
PARSANIA, PH
PATEL, SR
[J]. BRITISH POLYMER JOURNAL, 1985, 17 (04): : 354 - 359
[6] Synthesis and Physico-Chemical Study of Epoxy Methacrylate of 9,9'-Bis(4-Hydroxy Phenyl) anthrone-10 and its Jute and Glass Composites
Thanki, J. D.
Parsania, P. H.
[J]. JOURNAL OF POLYMER MATERIALS, 2016, 33 (02): : 305 - 317
[7] THERMAL-BEHAVIOR OF THE POLY(2-METHOXY)-CYANURATE OF 1,1'-BIS(4-HYDROXY PHENYL)-CYCLOHEXANE
PARSANIA, PH
PATEL, KC
PATEL, RD
[J]. JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS, 1985, 23 (01) : 199 - 203
[8] Synthesis and Characterization of Methacrylate Epoxy Resin of 1,1′-Bis(4-hydroxyphenyl) Cyclohexane and Its Composites
Patel, Jignesh V.
Bhattand, Ritesh D.
Parsania, Parsotam H.
[J]. JOURNAL OF POLYMER MATERIALS, 2014, 31 (04): : 409 - 420
[9] Synthesis and physico-chemical properties of copolyesters of 1,1′-bis(3-methyl-4-hydroxy phenyl)cyclohexane with 2,2′-bis(4-hydroxy phenyl)propane with terephthaloyl chloride
Kavthia, SH
Manwar, BG
Parsania, PH
[J]. JOURNAL OF MACROMOLECULAR SCIENCE-PURE AND APPLIED CHEMISTRY, 2004, A41 (01): : 29 - 38
[10] Thermal studies of cured epoxy resins based on 1,1′-bis (3-methyl-4-hydroxy phenyl) cyclohexane
Sanariya, MR
Kagathara, VM
Parsania, PH
[J]. JOURNAL OF POLYMER MATERIALS, 2000, 17 (03): : 319 - 323

← 1 2 3 4 →