Research and application on slab camber control model in hot rolling

被引：10

作者：

Xu, Dong ^{[1
]}

Liu, Yang ^{[1
]}

Wang, Xiaochen ^{[1
]}

Yang, Quan ^{[1
]}

Dai, Zhengyang ^{[1
]}

Wang, Xiaodong ^{[2
]}

机构：

[1] Univ Sci & Technol Beijing, Inst Engn Technol, Beijing 100083, Peoples R China

[2] Shougang Jingtang United Iron & Steel Co Ltd, Tangshan, Peoples R China

来源：

IRONMAKING & STEELMAKING | 2020年 / 47卷 / 07期

基金：

北京市自然科学基金; 中国国家自然科学基金;

关键词：

Hot rough rolling; slab camber; control model; simulation research and application;

D O I：

10.1080/03019233.2019.1609736

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

To investigate the problem of slab camber in rough rolling of hot strip mills, a 1580 mm roughing mill based on factors including the wedge of the incoming hot rolled slab, running deviation of the slab, the longitudinal stiffness difference between the two sides of the mill, and plane shape bending. Furthermore, the parameters of lateral flow in the model of plane shape control are systematically analysed. By using ABAQUS/Explicit, a roll-strip coupled dynamic finite element model is established and the simulation results of plane shape control are validated. After being used in a hot rolling mill, the hit rate of control of the slab camber is increased from 80.20 to 87.99%. The control level of the slab camber is improved and the problem of slab camber is relieved by the proposed camber control model. Theoretical analysis and field application results indicate that the camber control strategy is effective.

引用

页码：781 / 789

页数：9

共 50 条

[31] Influence of crossed roller on generating camber in hot rough rolling
Xu D.
Dai Z.-Y.
Liu Y.
Yang Q.
Wang X.-C.
Sun Y.-Z.
Liu K.-D.
[J]. Gongcheng Kexue Xuebao/Chinese Journal of Engineering, 2018, 40 (08): : 954 - 960
[32] DEVELOPMENT OF CAMBER CONTROL TECHNIQUE IN PLATE ROLLING
OHMORI, K
INOUE, M
MIYAKE, T
TANAKA, Y
NISHIZAKI, K
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 72 (16): : 2248 - 2255
[33] Analysis of tracking problems, camber and wedge in hot strip rolling
Nilsson, A
Ludvigsson, T
[J]. REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1999, 96 (7-8): : 901 - 910
[34] Model and algorithm of furnace area production scheduling in slab hot rolling
[J]. Jiang, Z.-Y. (zyjiang@ustb.edu.cn), 1600, University of Science and Technology Beijing (34):
[35] Position and Camber Measurement in the Hot Rolling Process: EMG hotCAM
Eichert, Guido
Devorich, Steve
[J]. AISTECH 2013: PROCEEDINGS OF THE IRON & STEEL TECHNOLOGY CONFERENCE, VOLS I AND II, 2013, : 2329 - 2337
[36] Research and Analysis on Mathematical Model of Looper Control in Hot Strip Rolling Mills
Zhong Yun-feng
Tan Shu-bin
[J]. 2008 CHINESE CONTROL AND DECISION CONFERENCE, VOLS 1-11, 2008, : 1273 - 1276
[37] AN ANALYSIS OF CAMBER MECHANISM IN PLATE ROLLING - DEVELOPMENT OF CAMBER CONTROL-SYSTEM IN PLATE ROLLING .1.
OHMORI, K
ISOYAMA, S
INOUE, M
MIYAKE, T
TANAKA, Y
KITAHAMA, M
[J]. TRANSACTIONS OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1986, 26 (02) : B61 - B61
[38] DEVELOPMENT OF CAMBER CONTROL-SYSTEM IN PLATE ROLLING .1. AN ANALYSIS OF CAMBER MECHANISM IN PLATE ROLLING
OHMORI, K
[J]. TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 1985, 71 : 1175 - 1175
[39] Research on thickness distribution rule of intermediate slab during hot strip rolling
Peng W.
Wan Z.
Sun J.
Wu W.
Sun J.
Zhang D.
[J]. Zhongnan Daxue Xuebao (Ziran Kexue Ban)/Journal of Central South University (Science and Technology), 2023, 54 (04): : 1290 - 1299
[40] REDUCTION OF SLAB STOCK BY APPLICATION OF NATURAL SPREAD IN THE HOT-ROLLING OF PLATE
LUNDBERG, SE
HOLMBERG, A
[J]. STEEL RESEARCH, 1990, 61 (07): : 318 - 324

← 1 2 3 4 5 →