A failure criterion for debonding between encapsulants and leadframes in plastic IC packages

被引：16

作者：

Yi, S ^{[1
]}

Shen, LX ^{[1
]}

Kim, JK ^{[1
]}

Yue, CY ^{[1
]}

机构：

[1] Nanyang Technol Univ, Sch Mech & Prod Engn, Singapore 639798, Singapore

来源：

JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY | 2000年 / 14卷 / 01期

关键词：

failure criterion; bond strengths; interface stresses;

D O I：

10.1163/156856100742122

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

A failure criterion for debonding initiation between molding compounds and copper leadframes in plastic encapsulated integrated circuit (IC) packages is proposed. The leadframe pullout test is used to evaluate the bond strengths between molding compounds and leadframes in plastic encapsulated IC packages. The normal and shear stress fields along the interface are analyzed using the finite element method. An average stress approach is employed for the interface failure criterion and the tensile and shear interface bond strengths are obtained from the experimental failure loads. In a parametric study, the effects of specimen loading geometry, moisture, and surface contamination of copper leadframes on the interfacial bond strengths are specifically analyzed. The results show that the interface bond strengths determined for the two specimen geometries are consistent.

引用

页码：93 / 105

页数：13

共 50 条

[31] PREDICTED BOW OF PLASTIC PACKAGES OF INTEGRATED-CIRCUIT (IC) DEVICES
SUHIR, E
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 1993, 12 (09) : 951 - 972
[32] An effective method for calculation of corner stresses with applications to plastic IC packages
Wei, Z
Meng, LK
Tay, A
6TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE, PROCEEDINGS (EPTC 2004), 2004, : 534 - 540
[33] VISCOELASTIC PROPERTIES OF RESIN FOR IC PLASTIC PACKAGES AND RESIDUAL-STRESS
KAWADA, H
IKEGAMI, K
JSME INTERNATIONAL JOURNAL SERIES I-SOLID MECHANICS STRENGTH OF MATERIALS, 1992, 35 (02): : 152 - 158
[34] Scanning Acoustic Microscope (SAM) - A measurement tool for plastic IC packages
Nagalingam, J
MohdYusoff, SD
Ramakrishnan, P
Jaafar, R
Francis, C
PROCEEDINGS OF THE 1997 6TH INTERNATIONAL SYMPOSIUM ON THE PHYSICAL & FAILURE ANALYSIS OF INTEGRATED CIRCUITS, 1997, : 244 - 249
[35] Effects of molding compound on wire sweep in plastic encapsulated IC packages
Yoshihara, T
Ohno, Y
Kusuhara, A
Fujita, H
Maeda, M
ELECTRONICS AND COMMUNICATIONS IN JAPAN PART II-ELECTRONICS, 1999, 82 (11): : 28 - 34
[36] Modeling of interfacial delamination in plastic IC packages under hygrothermal loading
Tay, AAO
JOURNAL OF ELECTRONIC PACKAGING, 2005, 127 (03) : 268 - 275
[37] Analytical solutions of thermal stress distribution in plastic encapsulated IC packages
Xiao, ZM
Wang, B
2003 INTERNATIONAL SYMPOSIUM ON MICROELECTRONICS, 2003, 5288 : 968 - 973
[38] Influence of temperature, humidity and defect location on delamination in plastic IC packages
Tay, AAO
Lin, TY
ITHERM '98: SIXTH INTERSOCIETY CONFERENCE ON THERMAL AND THERMOMECHANICAL PHENOMENA IN ELECTRONIC SYSTEMS, 1998, : 179 - 184
[39] Influence of temperature, humidity, and defect location on delamination in plastic IC packages
Tay, AAO
Lin, TY
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 1999, 22 (04): : 512 - 518
[40] An effective method for calculation of corner stresses with applications to plastic IC packages
Zhou, Wei
Lim, Kian-Meng
Tay, Andrew A.
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2008, 31 (02): : 245 - 251

← 1 2 3 4 5 →