Fatigue test of Al-3% using axial loading testing machine for MEMS materials

被引：0

作者：

Park, Jun-Hyub ^{[1
]}

Choa, Sung-Hoon ^{[1
]}

Choi, Hyeon Chang ^{[1
]}

Myung, Man Sik ^{[1
]}

Lee, Chang Seung ^{[1
]}

Kim, Yun-Jae ^{[1
]}

机构：

[1] Tongmyong Univ Informat Technol, Pusan, South Korea

来源：

Advances in Electronic Packaging 2005, Pts A-C | 2005年

关键词：

D O I：

10.1115/IPACK2005-73195

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents high cycle fatigue properties of an Al-3%Ti thin film, used in a RF (radio-frequency) MEMS switch for a mobile phone. The thickness and width of the thin film of specimen are 1.1 mu m and 480 mu m, respectively. Tensile tests of five specimens are performed, from which the ultimate strength is found to be 144MPa. High cycle fatigue tests of six specimens are also performed, from which the fatigue strength coefficient and the fatigue strength exponent are found to be 336MPa and -0.1514, respectively.

引用

页码：1725 / 1730

页数：6

共 50 条

[41] Development of an axial loading system for fatigue testing of textile-composites at ultrasonic frequencies
Premanand, Aravind
Balle, Frank
MATERIALS LETTERS-X, 2022, 13
[42] Device for Testing at Combined Cyclic Fatigue Loading by Tensile and Torsion, Attachable to the Universal Testing Machine
Goanta, V.
Moraras, C.
Blanari, I.
EXPERIMENTAL TECHNIQUES, 2022, 46 (01) : 179 - 186
[43] Device for Testing at Combined Cyclic Fatigue Loading by Tensile and Torsion, Attachable to the Universal Testing Machine
V. Goanță
C. Morăraș
I. Blanari
Experimental Techniques, 2022, 46 : 179 - 186
[44] Random non-proportional fatigue tests with planar tri-axial fatigue testing machine
Inoue, T.
Nagao, R.
Takeda, N.
FRATTURA ED INTEGRITA STRUTTURALE, 2016, (38): : 259 - 265
[45] Development of Modulus and Fatigue Test Protocol for Fine Aggregate Matrix for Axial Direction of Loading
Gudipudi, P. P.
Underwood, B. S.
JOURNAL OF TESTING AND EVALUATION, 2017, 45 (02) : 497 - 508
[46] New fatigue damage evaluation of MEMS materials under tension-compression cyclic loading
Isono, Y
Kito, H
Kikuchi, T
Shimazu, T
Katayama, M
MEMS 2005 Miami: Technical Digest, 2005, : 443 - 446
[47] Vibration test of bearing ball fatigue testing machine based on VB
Wu Shuqian
Mei Mei
Zhou Jingling
Zhu Weinan
Wu Guoqing
MACHINE DESIGN AND MANUFACTURING ENGINEERING III, 2014, : 523 - 526
[48] FATIGUE TESTING MACHINE USING VARIABLE LOAD CYCLES
TYABLIKO.YE
OGANESYA.AT
BUGAETS, AI
INDUSTRIAL LABORATORY, 1967, 33 (09): : 1385 - &
[49] Wear-and-fatigue test methods as implemented on the SI testing machine
Makhutov, NA
Bogdanovich, AV
Andronov, PV
Marchenko, AV
Tyurin, AS
Sosnovskii, LA
INDUSTRIAL LABORATORY, 1995, 61 (06): : 348 - 352
[50] Fatigue Testing of Automotive Suspension Springs with a New Test Machine.
Hutter, Werner
Schuetz, Walter
ATZ Automobiltechnische Zeitschrift, 1988, 90 (04) : 165 - 166

← 1 2 3 4 5 →