Size effect of High Performance Concrete with Blast Furnace Slag on Compressive Strength and Modulus of Elasticity

被引：1
|
作者：
Park, Wan-Shin [2 ]
Kim, Jeong-Eun [2 ]
Eom, Nam-Yong [2 ]
Kim, Do-Gyeum [3 ]
Cho, Myung-Sug [4 ]
Yun, Hyun-Do [1 ]
机构：
[1] Chungnam Natl Univ, Dept Architectural Engn, 99 Daehak Ro, Taejon, South Korea
[2] Chungnam Natl Univ, Dept Construct Engn Educ, Taejon, South Korea
[3] Korea Inst Construct Technol, Goyang, South Korea
[4] Korea Hydro & Nucl Power CO LTD, Cent Res Inst, Daejeon, South Korea
来源：
PROGRESS IN INDUSTRIAL AND CIVIL ENGINEERING II, PTS 1-4 | 2013年 / 405-408卷
关键词：
High performance concrete; Mixing proportioning; Blast furnace slag; Replacement ratio; Size effect; Compressive strength; Modulus of elasticity;
D O I：
10.4028/www.scientific.net/AMM.405-408.2820
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The 100 x 200 mm cylinder specimens are standard size to measure the compressive strength and modulus of elasticity. However, it is not enough for experimental data of mechanical properties of HPC about size effect. The aim of this study is to investigate the size effect of high performance concrete (HPC) using blast furnace slag (BS) for mechanical properties such as, compressive strength and modulus of elasticity. Therefore, in this study, Type A (100 x 200 mm cylinder specimens) and Type B (150 x 300 cylinder specimens) were prepared. Blast furnace slag is used as a replacement for ordinary Portland cement (OPC). The compressive strength, modulus of elasticity of harden concrete were determined in the laboratory.
引用
收藏
页码：2820 / +
页数：2
相关论文
共 50 条
  • [41] Size Effect of Compressive Strength and Shrinkage Characteristics of Ultra High Performance Concrete
    Shui L.
    Jianzhu Cailiao Xuebao/Journal of Building Materials, 2019, 22 (04): : 632 - 637
  • [42] Predicting compressive strength of high-performance concrete with high volume ground granulated blast-furnace slag replacement using boosting machine learning algorithms
    Rathakrishnan, Vimal
    Beddu, Salmia Bt
    Ahmed, Ali Najah
    SCIENTIFIC REPORTS, 2022, 12 (01)
  • [43] The effect of size distribution of slag particles obtained in dry granulation on blast furnace slag cement strength
    Liu, Junxiang
    Qin, Qin
    Yu, Qingbo
    Powder Technology, 2021, 362 : 32 - 36
  • [44] Predicting compressive strength of high-performance concrete with high volume ground granulated blast-furnace slag replacement using boosting machine learning algorithms
    Vimal Rathakrishnan
    Salmia Bt. Beddu
    Ali Najah Ahmed
    Scientific Reports, 12
  • [45] The effect of size distribution of slag particles obtained in dry granulation on blast furnace slag cement strength
    Liu, Junxiang
    Qin, Qin
    Yu, Qingbo
    POWDER TECHNOLOGY, 2020, 362 : 32 - 36
  • [46] Effect of Fly Ash, Silica Fume and Blast Furnace Slag on Mechanical Property of high performance concrete
    Eom, Nam-Yong
    Park, Wan-Shin
    Kim, Jeong-Eun
    Kim, Sun-Woong
    Kim, Do-Gyeum
    Cho, Myung-Sug
    ADVANCED MATERIALS DESIGN AND MECHANICS II, 2013, 372 : 243 - +
  • [47] The effect of mineral admixture type on the modulus of elasticity of high strength concrete
    Yildiz, Kuersat
    Ugur, Latif Onur
    SCIENTIFIC RESEARCH AND ESSAYS, 2009, 4 (08): : 791 - 798
  • [48] Effect of aggregate mineralogical properties on high strength concrete modulus of elasticity
    Kaya, Mustafa
    Komur, M. Aydin
    Gursel, Ercin
    ADVANCES IN CONCRETE CONSTRUCTION, 2022, 13 (06) : 411 - 422
  • [49] EFFECT OF COARSE AGGREGATE ON ELASTIC-MODULUS AND COMPRESSIVE STRENGTH OF HIGH-PERFORMANCE CONCRETE
    ZHOU, FP
    LYDON, FD
    BARR, BIG
    CEMENT AND CONCRETE RESEARCH, 1995, 25 (01) : 177 - 186
  • [50] Influence of sustained compressive load on the carbonation of concrete containing blast furnace slag
    Liu, Zhiyuan
    van den Heede, Philip
    Zhang, Cheng
    Shi, Xinyu
    Wang, Ling
    Li, Juan
    Yao, Yan
    De Belie, Nele
    CONSTRUCTION AND BUILDING MATERIALS, 2022, 335
12345