Size effect of High Performance Concrete with Blast Furnace Slag on Compressive Strength and Modulus of Elasticity

被引：1

作者：

Park, Wan-Shin ^{[2
]}

Kim, Jeong-Eun ^{[2
]}

Eom, Nam-Yong ^{[2
]}

Kim, Do-Gyeum ^{[3
]}

Cho, Myung-Sug ^{[4
]}

Yun, Hyun-Do ^{[1
]}

机构：

[1] Chungnam Natl Univ, Dept Architectural Engn, 99 Daehak Ro, Taejon, South Korea

[2] Chungnam Natl Univ, Dept Construct Engn Educ, Taejon, South Korea

[3] Korea Inst Construct Technol, Goyang, South Korea

[4] Korea Hydro & Nucl Power CO LTD, Cent Res Inst, Daejeon, South Korea

来源：

PROGRESS IN INDUSTRIAL AND CIVIL ENGINEERING II, PTS 1-4 | 2013年 / 405-408卷

关键词：

High performance concrete; Mixing proportioning; Blast furnace slag; Replacement ratio; Size effect; Compressive strength; Modulus of elasticity;

D O I：

10.4028/www.scientific.net/AMM.405-408.2820

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The 100 x 200 mm cylinder specimens are standard size to measure the compressive strength and modulus of elasticity. However, it is not enough for experimental data of mechanical properties of HPC about size effect. The aim of this study is to investigate the size effect of high performance concrete (HPC) using blast furnace slag (BS) for mechanical properties such as, compressive strength and modulus of elasticity. Therefore, in this study, Type A (100 x 200 mm cylinder specimens) and Type B (150 x 300 cylinder specimens) were prepared. Blast furnace slag is used as a replacement for ordinary Portland cement (OPC). The compressive strength, modulus of elasticity of harden concrete were determined in the laboratory.

引用

页码：2820 / +

页数：2

共 50 条

[21] Residual compressive behaviour of pre-heated high-performance concrete with blast-furnace-slag
Xiao, JZ
Meng, XA
Zhang, C
FIRE SAFETY JOURNAL, 2006, 41 (02) : 91 - 98
[22] Evaluation on The Compressive Strength of Concrete Incorporating High Volume Blast-Furnace Slag Subjected to Initial Frost Damage
Koh, Kyung-Taek
Ryu, Gum-Sung
Ahn, Ki-Hong
Park, Chun-Jin
Lee, Jang-Hwa
FRONTIERS OF MANUFACTURING AND DESIGN SCIENCE II, PTS 1-6, 2012, 121-126 : 2440 - 2444
[23] Effect of alkali activator dosage on compressive and tensile strength of ground granulated blast furnace slag based geopolymer concrete
Singh, Ashita
Bhadauria, Sudhir Singh
Mudgal, Manish
Kushwah, Suresh Singh
CANADIAN JOURNAL OF CIVIL ENGINEERING, 2022, 49 (01) : 73 - 82
[24] Investigation on modulus of elasticity of fly ash-ground granulated blast furnace slag blended geopolymer concrete
Bellum, Ramamohana Reddy
Muniraj, Karthikeyan
Madduru, Rama Chand
MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 718 - 723
[25] METHODS OF ADDITION OF BLAST-FURNACE SLAG - THEIR EFFECT ON THE COMPRESSIVE STRENGTH OF MORTARS AND CONCRETES
LONGO, A
TORRENT, RJ
JOURNAL OF THE AMERICAN CONCRETE INSTITUTE, 1986, 83 (02): : 340 - 341
[26] Effect of High-Temperature Curing Methods on the Compressive Strength Development of Concrete Containing High Volumes of Ground Granulated Blast-Furnace Slag
Jung, Wonsuk
Choi, Se-Jin
ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2017, 2017
[27] Soft computing models to evaluate the effect of fly ash and ground granulated blast furnace slag (GGBS) on the compressive strength of concrete in normal and high strength ranges
Mohammed, Hba Xalid
Mohammed, Ahmed Salih
Hassan, A. M. T.
STRUCTURES, 2023, 58
[28] Effect of Elevated Temperature on Meso- and Micro-Structure and Compressive Strength of High-Strength Concrete and Mortar Containing Blast-Furnace Slag
Li, Zhiwei
Li, Long
Wang, Jiakun
Wu, Xianghao
JOURNAL OF ADVANCED CONCRETE TECHNOLOGY, 2018, 16 (10) : 498 - 511
[29] Machine intelligence models for predicting compressive strength of concrete incorporating fly ash and blast furnace slag
Bashir, Abba
Gupta, Megha
Ghani, Sufyan
MODELING EARTH SYSTEMS AND ENVIRONMENT, 2025, 11 (02)
[30] Compressive strength of concrete containing furnace blast slag; optimized machine learning-based models
Kioumarsi, Mahdi
Dabiri, Hamed
Kandiri, Amirreza
Farhangi, Visar
CLEANER ENGINEERING AND TECHNOLOGY, 2023, 13

← 1 2 3 4 5 →