Surface treatment and nickel plating of iron powder metallurgy parts for corrosion protection

被引：13
|
作者：
Etaat, M. [1 ]
Emamy, M. [1 ]
Ghambari, M. [1 ]
Fadaei, E. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Tehran 553, Iran
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 09期
关键词：
Powder metallurgy; Surface treatments; Nickel plating; Corrosion; P/M PARTS; COMPACTS;
D O I：
10.1016/j.matdes.2009.02.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study is the evaluation of corrosion behavior of nickel coated iron compacts produced by powder metallurgy (PM). To improve the quality of PM products three different secondary operations: copper infiltration, resin impregnation and steam-treatment were applied for pore closuring of iron PM specimens before being electroplated by nickel. After microstructural studies, salt fog exposure and electrochemical tests were carried out to study the corrosion behavior of the nickel coated specimens. The results showed that, nickel coated steam treated specimens exhibit better performance on corrosion testing in comparison with others. Although copper infiltrated specimens showed less porosity in PM products, observed limited corrosion behavior can be due to its galvanic effect. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3560 / 3565
页数：6
相关论文
共 50 条
  • [41] Influence of Nitrogen Content on the Corrosion Behavior of Powder Metallurgy Nickel-Free Austenitic Stainless Steel
    Yu, Weili
    Du, Changhai
    Shen, Hongren
    He, Hao
    Yu, Yong
    Li, Yimin
    Luo, Fenghua
    ADVANCES IN MATERIALS SCIENCE AND ENGINEERING, 2021, 2021 (2021)
  • [42] Investigation of corrosion behaviour of porous powder metallurgy parts electrochemically coated with diamond nano particles modified chromium
    Bilgili, E. Zeynep
    Salamci, Elmas
    Asan, Abdurrahman
    Unal, Rahmi
    Valov, Radoslav
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2016, 31 (03): : 580 - 589
  • [43] Effect of electrolytic nickel coating on fatigue life of iron based powder metal parts
    Cinici, H.
    Karacif, K.
    Kafkas, F.
    Citak, R.
    KOVOVE MATERIALY-METALLIC MATERIALS, 2011, 49 (05): : 355 - 359
  • [44] Protection of the Surface of Parts in Friction Units of Machines from Corrosion Using the Method of Finishing Antifriction Nonabrasive Treatment
    Pogonyshev, V.A.
    Mokshin, I.A.
    Steel in Translation, 2024, 54 (05) : 439 - 445
  • [45] Nickel Plating: A New Surface Treatment for the Electrical Applications of Aluminum.
    Lefebvre, J.
    Materiaux et Techniques, 1982, 70 (9-10): : 287 - 292
  • [46] Influence of Storage Conditions on Powder Surface State and Hot Deformation Behavior of a Powder Metallurgy Nickel-Based Superalloy
    Zhang, Qiang
    Zheng, Liang
    Yuan, Hua
    Li, Zhou
    Zhang, Guoqing
    Xie, Jianxin
    ADVANCED ENGINEERING MATERIALS, 2022, 24 (08)
  • [47] Influence of Cutting Parameters on Surface Characteristics for Milling Powder Metallurgy Nickel-based Superalloy
    Qiao, Yang
    Ai, Xing
    Lu, Zhanqiang
    NEW MATERIALS, APPLICATIONS AND PROCESSES, PTS 1-3, 2012, 399-401 : 1635 - +
  • [48] Mechanical properties and corrosion behavior of powder metallurgy iron-hydroxyapatite composites for biodegradable implant applications
    Dehestani, Mahdi
    Adolfsson, Erik
    Stanciu, Lia A.
    MATERIALS & DESIGN, 2016, 109 : 556 - 569
  • [49] Wear and corrosion resistant Mn-doped austenitic cast iron prepared by powder metallurgy method
    Li, Xiangrong
    Liu, Junbo
    Xiong, Ji
    Yang, Lu
    Gou, Qingshan
    Song, Xiangyu
    Guo, Zhixing
    Hua, Tao
    Liang, Mengxia
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (03): : 6376 - 6385
  • [50] USE OF CHEMICAL NICKEL PLATING FOR PROTECTION FROM HYDROGEN-SULFIDE AND CARBON-DIOXIDE CORROSION
    POLYAKOV, VN
    KARSHIN, VP
    GORDIENKO, LK
    SOVIET MATERIALS SCIENCE, 1986, 22 (03): : 326 - 327
12345