Surface treatment and nickel plating of iron powder metallurgy parts for corrosion protection

被引：13
|
作者：
Etaat, M. [1 ]
Emamy, M. [1 ]
Ghambari, M. [1 ]
Fadaei, E. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Tehran 553, Iran
来源：
MATERIALS & DESIGN | 2009年 / 30卷 / 09期
关键词：
Powder metallurgy; Surface treatments; Nickel plating; Corrosion; P/M PARTS; COMPACTS;
D O I：
10.1016/j.matdes.2009.02.029
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The aim of this study is the evaluation of corrosion behavior of nickel coated iron compacts produced by powder metallurgy (PM). To improve the quality of PM products three different secondary operations: copper infiltration, resin impregnation and steam-treatment were applied for pore closuring of iron PM specimens before being electroplated by nickel. After microstructural studies, salt fog exposure and electrochemical tests were carried out to study the corrosion behavior of the nickel coated specimens. The results showed that, nickel coated steam treated specimens exhibit better performance on corrosion testing in comparison with others. Although copper infiltrated specimens showed less porosity in PM products, observed limited corrosion behavior can be due to its galvanic effect. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：3560 / 3565
页数：6
相关论文
共 50 条
  • [21] Corrosion behavior of powder metallurgy Y2O3 dispersed iron-and nickel-base superalloys
    M. Debata
    G. S. Upadhyaya
    Journal of Materials Engineering and Performance, 2001, 10 : 602 - 607
  • [22] Corrosion behavior of powder metallurgy Y2O3 dispersed iron-and nickel-base superalloys
    Debata, M
    Upadhyaya, GS
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2001, 10 (05) : 602 - 607
  • [23] Investigation of machinability of iron based metal matrix composite (MMC) powder metallurgy parts
    Szalay, Tibor
    Czampa, Miklos
    Markos, Sandor
    Farkas, Balazs
    2ND INTERNATIONAL ADVANCES IN APPLIED PHYSICS AND MATERIALS SCIENCE CONGRESS, 2012, 1476 : 300 - 303
  • [24] Investigation of mechanical properties and corrosion behavior of Nickel Bronze alloy prepared powder metallurgy
    Veerappan, G.
    Pritima, D.
    Marichamy, S.
    Dhinakaran, V.
    Sathish, S.
    Materials Today: Proceedings, 2023, 74 : 44 - 48
  • [25] DEVELOPMENT OF HEAT TREATMENT FOR A POWDER METALLURGY NICKEL-BASE SUPERALLOY
    Tian, Gaofeng
    Jia, Chengchang
    Yin, Fazhang
    Hu, Benfu
    TMS 2009 138TH ANNUAL MEETING & EXHIBITION - SUPPLEMENTAL PROCEEDINGS, VOL 1: MATERIALS PROCESSING AND PROPERTIES, 2009, : 227 - +
  • [26] Oxidation and corrosion protection by halide treatment of powder metallurgy Ti and Ti6Al4V alloy
    Tsipas, S. A.
    Gordo, E.
    Jimenez-Morales, A.
    CORROSION SCIENCE, 2014, 88 : 263 - 274
  • [27] Electroless Nickel Plating and Process Simulation for Surface Treatment
    Liu, Wei
    Zhu, LiMing
    Deng, Xin
    Sun, Dezhu
    Chen, Kun
    Hu, XiaoKai
    2022 23RD INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY, ICEPT, 2022,
  • [28] Corrosion Behaviour of Powder Metallurgy Biomaterials from Phosphated Carbonyl-Iron Powders
    Kupkova, Miriam
    Hrubovcakova, Monika
    Kupka, Martin
    Orinakova, Renÿta
    Turonova, Andrea Morovska
    INTERNATIONAL JOURNAL OF ELECTROCHEMICAL SCIENCE, 2015, 10 (01): : 671 - 681
  • [29] A PREVENTIVE METHOD OF FRETTING CORROSION DAMAGE BY ELECTROLESS NICKEL PLATING TREATMENT
    NISHIZAKA, T
    URUSHIHARA, A
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1988, 33 (09): : 709 - 716
  • [30] Degreasing behavior of iron-based powder metallurgy complex parts by warm flow compaction
    Hu, Chang-Xu
    Ngai, Tungwai-Leo
    Zheng, Jun-Jun
    Xiao, Zhi-Yu
    Li, Yuan-Yuan
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2010, 32 (03): : 336 - 339
12345