Application of a new ultrasonic-assisted semi-solid brazing on dissimilar Al/Mg alloys

被引：20
|
作者：
Xu, Zhiwu [1 ]
Li, Zhengwei [1 ]
Peng, Bo [1 ]
Ma, Zhipeng [1 ]
Yan, Jiuchun [1 ]
机构：
[1] Harbin Inst Technol, State Key Lab Adv Welding & Joining, Harbin 150001, Heilongjiang, Peoples R China
来源：
MATERIALS LETTERS | 2018年 / 228卷
基金：
美国国家科学基金会;
关键词：
Ultrasonic; Semi-solid brazing; Intermetallic compound; Microstructure; Diffusion; Cavitation; AL-ALLOY; MG; MAGNESIUM;
D O I：
10.1016/j.matlet.2018.05.131
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this work, an ultrasonic-assisted semi-solid brazing method was proposed to join Al/Mg. Oxide films on substrate surfaces can be successfully removed even when filler metal was at semi-solid state. A large quantity of intermetallic compounds (IMCs) formed at 460 degrees C because of large amount of Al and Mg dissolved into joint caused by strong cavitation. Decreasing the temperature to 430 degrees C could significantly reduce IMC. However, weak cavitation happened inside low liquid phase fraction at 420 degrees C, making it difficult to break IMCs and solid phases. (C) 2018 Elsevier B.V. All rights reserved.
引用
收藏
页码：72 / 76
页数：5
相关论文
共 50 条
  • [1] Reduction of intermetallic compounds in ultrasonic-assisted semi-solid brazing of Al/Mg alloys
    Xu, Zhiwu
    Li, Zhengwei
    Xu, Lei
    Yan, Jiuchun
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (02) : 163 - 170
  • [2] Ultrasonic-assisted brazing of Al-Ti dissimilar alloy by a filler metal with a large semi-solid temperature range
    Chen, Xiaoguang
    Xie, Ruishan
    Lai, Zhiwei
    Liu, Lei
    Zou, Guisheng
    Yan, Jiuchun
    MATERIALS & DESIGN, 2016, 95 : 296 - 305
  • [3] Semi-solid processing of Al and Mg alloys
    Shehata, MT
    Zoqui, EJ
    Kao, V
    Essadiqi, E
    Materials in the Automotive Industry, 2001, : 207 - 223
  • [4] Microstructure of Ultrasonic-assisted Soldering Mg/Al Dissimilar Metal Joints
    Yu Weiyuan
    Gao Mengzhao
    Zhang Tianyu
    Shang Jiangxu
    Yan Zehua
    RARE METAL MATERIALS AND ENGINEERING, 2018, 47 (10) : 3197 - 3202
  • [5] Application of semi-solid forming to Mg-Zn-Al-Ca alloys
    Kamado, Shigeharu
    Ikeya, Naoyuki
    Rudi, Rachmat Suhardi
    Araki, Tomomi
    Kojima, Yo
    Materials Science Forum, 2000, 350 : 205 - 214
  • [6] Application of semi-solid forming to Mg-Zn-Al-Ca alloys
    Kamado, S
    Ikeya, N
    Rudi, RS
    Araki, T
    Kojima, Y
    MAGNESIUM ALLOYS 2000, 2000, 350-3 : 205 - 213
  • [7] Ultrasonic-assisted brazing of Al/Fe with Al alloy
    Wang, Qian
    Leng, Xuesong
    Yan, Jiuchun
    Cheng, Xiaoguang
    Hanjie Xuebao/Transactions of the China Welding Institution, 2013, 34 (10): : 47 - 50
  • [8] Unravelling the ultrasonic effect on residual stress and microstructure in dissimilar ultrasonic-assisted friction stir welding of Al/Mg alloys
    Muhammad, Najib Ahmad
    Geng, Peihao
    Wu, ChuanSong
    Ma, Ninshu
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2023, 186
  • [9] Semi-solid behavior of new Al-Si-Mg alloys for thixoforming
    Paes, A
    Zoqui, EJ
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 406 (1-2): : 63 - 73
  • [10] Superior creep behavior of n-SiCp/Mg–9%Al composites fabricated by ultrasonic-assisted semi-solid hot pressing of powder
    Ming Li
    Qiang Chen
    Gaozhan Zhao
    Zhiwei Huang
    Jianquan Tao
    Yuanyuan Wan
    Hongxia Wang
    Applied Physics A, 2019, 125
12345