3D PRINTED RF PASSIVE COMPONENTS BY LIQUID METAL FILLING

被引：0
|
作者：
Yang, Chen [1 ]
Wu, Sung-Yueh [1 ,2 ]
Glick, Casey [1 ]
Choi, Yun Seok [3 ]
Hsu, Wensyang [2 ]
Lin, Liwei [1 ]
机构：
[1] Univ Calif Berkeley, Berkeley, CA 94720 USA
[2] Natl Chiao Tung Univ, Hsinchu 30050, Taiwan
[3] Samsung Elect Co Ltd, Hwaseong Si, South Korea
来源：
2015 28TH IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS 2015) | 2015年
关键词：
MICROFLUIDIC DEVICES; LAB;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
We present three-dimensional (3D) micro-scale electrical components and systems by means of 3D printing and a liquid-metal-filling technique. The 3D supporting polymer structures with hollow channels and cavities are fabricated from inkjet printing. Liquid metals made of silver particles suspension in this demonstration are then injected into the hollow paths and solidified to form metallic elements and interconnects with high electrical conductivity. In the proof-of-concept demonstrations, various radio-frequency (RF) passive components, including 3D-shaped inductors, capacitors and resistors are fabricated and characterized. High-Q inductors and capacitors up to 1 GHz have been demonstrated. This work establishes an innovative way to construct arbitrary 3D electrical systems with efficient and labor-saving processes.
引用
收藏
页码：261 / 264
页数：4
相关论文
共 50 条
  • [21] Influence of Thermal Processing for 3D Printed Components
    Alexandrescu, Dragos
    Antoniac, Iulian
    Olteanu, Cristian
    Anghel, Lucretia
    Sarbu, Nicolae
    Ciocoiu, Robert
    Scutariu, Mihaela Monica
    Surlari, Zinovia
    Ioanid, Nicoleta
    Stefanescu, Victorita
    MATERIALE PLASTICE, 2021, 58 (04) : 250 - 260
  • [22] Sliding Functionality for 3D Printed Lightweight Components
    Panaitescu, Ileana
    Ripoll, Manel Rodríguez
    Katsich, Christian
    Hubmann, Reinhard
    Badisch, Ewald
    BHM Berg- und Huttenmannische Monatshefte, 2021, 166 (05): : 250 - 255
  • [23] 3D Printed 5-Order Butterworth Passive Filter with Conical Inductors for RF Broadband Applications
    Salas-Barenys, A.
    Vidal, N.
    Lopez-Villegas, J. M.
    2019 XXXIV CONFERENCE ON DESIGN OF CIRCUITS AND INTEGRATED SYSTEMS (DCIS), 2019,
  • [24] Adjoint Optimization of 3D Printed RF GRIN Lenses
    Whiting, Eric B.
    Campbell, Sawyer D.
    Mackertich-Sengerdy, Galestan
    Soltani, Saber
    Werner, Douglas H.
    Werner, Pingjuan L.
    2022 16TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2022,
  • [25] 3D PRINTED POROUS DIELECTRIC SUBSTRATES FOR RF APPLICATIONS
    SnigdhaTummala, Vana
    Mian, Ahsan
    Chamok, Nowrin H.
    Ali, Mohammod
    Clifford, Jallisa
    Majumdar, Prasun
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 10, 2017,
  • [26] 3D Printed Substrates for the Design of Compact RF Systems
    Ghazalil, Mohd Ifwat Mohd
    Mondal, Saikat
    Karuppuswami, Saranraj
    Chahal, Premjeet
    2019 IEEE 69TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2019, : 113 - 118
  • [27] RF passive components in MCM-D
    Zoccal, Leonardo B.
    Yamamoto, Silas D.
    Cabreira, Clovis M.
    Flacker, R. Alexander
    Gomes, Eliana A.
    Diniz, Jose A.
    Swart, Jacobus W.
    2007 SBMO/IEEE MTT-S INTERNATIONAL MICROWAVE AND OPTOELECTRONICS CONFERENCE, VOLS 1 AND 2, 2007, : 122 - 126
  • [28] A 3D printed liquid metal emulsion for low stress activated stretchable electronics
    Cruz, Ramon E. Sanchez
    Zopf, Stephanie F.
    Boley, J. William
    JOURNAL OF COMPOSITE MATERIALS, 2023, 57 (04) : 829 - 839
  • [29] Reconfigurable Patch Antenna with Liquid Metal Tuning Slots and 3D Printed Microfluidics
    Song, Lingnan
    Rahmat-Samii, Yahya
    2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING, 2018, : 289 - 290
  • [30] Simulation of 3D Printed Antenna System using Liquid Metal Antenna Elements
    Thews, Jonathan
    O'Donnell, Alan
    Michaels, Alan J.
    2018 NASA/ESA CONFERENCE ON ADAPTIVE HARDWARE AND SYSTEMS (AHS 2018), 2018, : 179 - 183
12345