Fabrication results of full scale mock-up for ITER W port in Korea

被引：7
|
作者：
Kim, H. S. [1 ]
Park, C. K. [1 ]
Kim, G. H. [1 ]
Hong, K. H. [1 ]
Lee, Y. J. [1 ]
Kim, B. C. [1 ]
Ahn, H. J. [1 ]
Lee, H. G. [1 ]
Kim, T. S. [2 ]
Lee, J. S. [2 ]
Won, J. G. [2 ]
Sa, J. W. [3 ]
Choi, C. H. [3 ]
机构：
[1] Natl Fus Res Inst, ITER Korea, Taejon 305333, South Korea
[2] Hyundai Heavy Ind Co Ltd, Ulsan 682792, South Korea
[3] ITER Org, F-13115 St Paul Les Durance, France
来源：
FUSION ENGINEERING AND DESIGN | 2014年 / 89卷 / 7-8期
关键词：
ITER; Vacuum vessel; Port; Lower port stub extension; Mock-up;
D O I：
10.1016/j.fusengdes.2014.04.053
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
After a contract with Hyundai Heavy Industries Co. Ltd. (HHI) on January 2010 for the manufacture of the ITER equatorial and lower ports, manufacturing preparation activities have been performed. As part of the preparation activities, a full scale mock-up of the lower port stub extension (LPSE) #16 was fabricated by HHI in order to verify fabrication feasibility and set up the fabrication sequence for the LPSE. In this paper, major technical results from fabrication of a full scale mock-up will be presented with emphasis on the main manufacturing procedure, welding, nondestructive examination (NDE) and 3D dimensional inspection. Afterwards, progress of real product manufacturing is introduced. (C) 2014 Elsevier B.V. All rights reserved.
引用
收藏
页码：1779 / 1783
页数：5
相关论文
共 50 条
  • [21] Fabrication and thermal cycle testing of a first wall mock-up for ITER baffle blanket module
    Japan Atomic Energy Research Inst, Ibaraki-ken, Japan
    Fusion Technol, 3 pt 2 (908-913):
  • [22] ITER primary first wall mock-up fabrication and testing for Be/Cu alloy joining development
    Lorenzetto, P
    Cardella, A
    Daenner, W
    Fèbvre, M
    Ilzhoefer, A
    Richards, W
    Roedig, M
    FUSION ENGINEERING AND DESIGN, 2002, 61-62 : 643 - 648
  • [23] Fabrication and thermal cycle testing of a first wall mock-up for ITER baffle blanket module
    Hatano, T
    Suzuki, S
    Yokoyama, K
    Akiba, M
    Ohmori, J
    Kuroda, T
    Takatsu, H
    FUSION TECHNOLOGY, 1998, 34 (03): : 908 - 913
  • [24] Interference fit process development for the ITER Vacuum Vessel Gravity Support mock-up fabrication
    Cheon, Jason
    Park, Chulkyu
    Moon, Hokyu
    Chung, Woo-Ho
    Kim, Hyun-Soo
    Hong, Kwen-Hee
    Kim, Gwang-Ho
    Kim, Yu-Gyeong
    FUSION ENGINEERING AND DESIGN, 2019, 146 : 1907 - 1911
  • [25] Manufacture and first wall joining for an ITER primary wall module prototype: results of a medium scale mock-up manufacturing
    Febvre, M
    Bobin-Vastra, I
    Lorenzetto, P
    Bouveret, Y
    Cauvin, D
    Raisson, G
    Conchon, D
    FUSION ENGINEERING AND DESIGN, 2001, 56-57 : 267 - 271
  • [26] Mock-up qualification and prototype manufacture for ITER current leads
    Zhou, Tingzhi
    Lu, Kun
    Ran, Qingxiang
    Ding, Kaizhong
    Feng, Hansheng
    Wu, Huan
    Liu, Chenglian
    Song, Yuntao
    Niu, Erwu
    Bauer, Pierre
    Devred, Arnaud
    FUSION ENGINEERING AND DESIGN, 2015, 96-97 : 388 - 391
  • [27] Overview of the EU small scale mock-up tests for ITER high heat flux components
    Vieider, G.
    Barabash, V.
    Cardella, A.
    Chappuis, P.
    Duwe, R.
    Falter, H.
    Febvre, M.
    Giancarli, L.
    Ibbott, C.
    Jacobson, D.M.
    Jakeman, R.
    LeMarois, G.
    Lind, A.
    Merola, M.
    Pacher, H.D.
    Fusion Engineering and Design, 1998, 39-40 (Pt A): : 211 - 218
  • [28] Overview of the EU small scale mock-up tests for ITER high heat flux components
    Vieider, G
    Barabash, V
    Cardella, A
    Chappuis, P
    Duwe, R
    Falter, H
    Febvre, M
    Giancarli, L
    Ibbott, C
    Jacobson, DM
    Jakeman, R
    LeMarois, G
    Lind, A
    Merola, M
    Pacher, HD
    Peacock, A
    Pizzuto, A
    Plochl, L
    Riccardi, B
    Rodig, M
    Sangha, SPS
    Severi, Y
    Visca, E
    FUSION ENGINEERING AND DESIGN, 1998, 39-40 : 211 - 218
  • [29] ITER ICRF Antenna Reduced-Scale Mock-up EM Simulations and Comparisons with the Measurements
    Kyrytsya, V.
    Dumortier, P.
    Messiaen, A.
    Louche, F.
    Vervier, A.
    RADIO FREQUENCY POWER IN PLASMAS, 2009, 1187 : 281 - 284
  • [30] Fabrication of divertor mock-up with ODS-Cu and W by the improved brazing technique
    Tokitani, M.
    Hamaji, Y.
    Hiraoka, Y.
    Masuzaki, S.
    Tamura, H.
    Noto, H.
    Tanaka, T.
    Muroga, T.
    Sagara, A.
    NUCLEAR FUSION, 2017, 57 (07)
12345